Sleeve bushing 114L1058-3
Product Features
Flatted flange, 0.625 in. From center of flange to edge of flat, 0.560 in. Radius of flange
Manufacturer Specification
Flange Width
Between 0.0700 inches and 0.0800 inches
Interior Flange Hole Diameter
Between 0.2550 inches and 0.2750 inches
Interior Flange Left End To Centerline Distance
Between 0.4025 inches and 0.4525 inches
Interior Flange Width
Between 0.0850 inches and 0.1450 inches
Corner Shape
Chamfered inside right corner
Corner Shape
Chamfered left flange outside right corner
Corner Shape
Chamfered outside right corner
Corner Shape
Round left flange body corner
Corner Shape
Square inside left corner
Corner Shape
Square outside left corner
Surface Finish
32.0 microinches outside diameter surface of body
Surface Finish
50.0 microinches outside diameter surface of flange
Surface Finish
50.0 microinches right end surface of body
Surface Finish
50.0 microinches right end surface of left flange
Surface Finish
50.0 microinches inside diameter surface of body
Surface Finish
50.0 microinches left end surface of body and flange
Material Specification
Jh153, ty h11, fscm 81205 mfr ref 1st material response or ams 6487 mfr ref 2nd material response
Surface Treatment Specification
Mil-c-16173b military specification single treatment response inside diameter surface of body
Surface Treatment Specification
Qq-c-320 federal specification single treatment response outside diameter surface of body
Surface Treatment Specification
Qq-c-320 federal specification single treatment response left end surface of body and flange
Surface Treatment Specification
Qq-c-320 federal specification single treatment response outside diameter surface of flange
Surface Treatment Specification
Qq-c-320 federal specification single treatment response right end surface of body
Surface Treatment Specification
Qq-c-320 federal specification single treatment response right end surface of left flange
Style Designator
22c-2 solid, external flange one end, interior flang (s) not located at either end
Style Designator
Solid, external flange one end, interior flang (s) not located at either end
Test Data Document
81349-mil-i-6868 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
NSN
3120-00-786-2294
Description
Bushing,sleeve
Product Details
4.2070 inches minimum and 4.2270 inches maximum overall length, 0.8740 inches minimum and 0.8745 inches maximum body outside diameter, 0.5820 inches minimum and 0.5870 inches maximum body inside diameter, steel overall or steel comp h11 overall material, chromium right end surface of left flange surface treatment.
Check Availability
Receive price and stock quote via email.More in Series: 114L1058
- ISO9001 / AS9100 Quality Standards
- Volume Discounts Available
- Popular Trusted Brands
- Standard and Metric sizes
Popular Parts
- 4D0036N20C049 | Sleeve Bushing
- 042-782-001-381 | Bearing Block
- RCJT1 3/16B/P11245 | Ball Bearing Unit
- PKE-LB78100FH | Roller Bearing Unit
- PB22447FH2-15-16 | Roller Bearing Unit
- 8F0230 | Sleeve Bushing
- SFC26 | Ball Bearing Unit
- W67315EAHBX | Roller Bearing
- FCF-2 1/4 | Needle Bearing Cam Follower
- 3TAR24-28U | Annular Ball Bearing
- 867910 | Bearing Unit Housing
- NF16354 | Bearing Unit Housing
last updated on 04/29/2024