CAM FOLLOWER,NEEDLE BEARING
CCFH-1 1/8-SB
(NSN) National Stock Number
3110-01-360-7026
Federal Supply Classification
3110 Unmounted Antifriction Bearings
Item Name Code
00040
Schedule B Code
8482400000
Summary
2a thread class, right-hand thread direction, 0.6200 inches minimum thread length, 2.0300 inches nominal overall length, 1.1250 inches nominal overall outside diameter, 0.7500 inches minimum and 0.7510 inches maximum stud diameter
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| E | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | KZ |
Identification
An assembly consisting of a roller and stud used to effect a rolling contact with a cam, and convert the reciprocating or oscillating motion to linear motion.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 00040 | A044A0 | - | 1 |
Specifications
Thread Class
2a
Details
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.Thread Direction
right-hand
Details
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Thread Length
0.6200 inches minimum
Details
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.Overall Length
2.0300 inches nominal
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Overall Outside Diameter
1.1250 inches nominal
Details
The overall length of a straight line which passes through the center of an item,and terminates at the outside circumference.Stud Diameter
0.7500 inches minimum and 0.7510 inches maximum
Details
The length of a straight line which passes through the center of a stud,and terminates at the circumference.Outer Ring Width
0.7450 inches minimum and 0.7500 inches maximum
Details
None.Stud Length
1.1250 inches nominal
Details
A measurement of the longest dimension of the stud,in distinction from width.Thread Quantity Per Inch
16
Details
The number of threads on the item per linear inch measured on a line parallel to the thread axis.Nominal Thread Size
0.750 inches
Details
A designation that is used for the purpose of general identification of the thread.Lubrication Material
lubricant
Details
The chemical compound or mechanical mixture properties with which the item is lubricated.Material
plastic polyamide seal
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material
steel end plate
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material
steel outer ring
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material
steel roller
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material
steel stud
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Surface Treatment
oxide exposed surfaces as mounted
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Surface Treatment Document And Classification
mil-c-13924,class 3 mil spec single treatment response exposed surfaces as mounted
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Style Designator
cam follower
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Thread Series Designator
unc
Details
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| SW32839 | 98255 | A | - | 7 | 2 | - | KZ |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | A | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 49790 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 742 | Z | 9 |
Certified Supplier
Order with confidence, we are a valued certified supplier serving customers in the military and aerospace industries.
- ISO9001 / AS9100 Quality Standards
- HAZMAT Certified
- On Time Delivery
- Qualified Sales Team
- Counterfeit Parts Prevention
- 100% Product Inspections
Manufacturer
MCGILL MANUFACTURING CO, INC
CAGE: 92563
MONTICELLO
, IN
, 47960-1711
UNITED STATES
FAQs
Frequently asked questions for NSN 3110-01-360-7026
When the NSN 3110-01-360-7026 was assigned to the Federal Catalog?
It was assigned 32 years ago, on Mon, Jun 29, 1992
Does the NSN 3110-01-360-7026 contain any precious metals?
Does not contain precious metal
What is the NIIN of the NSN 3110-01-360-7026?
The National Item Identification Number (NIIN) of the NSN 3110-01-360-7026 is 01-360-7026
Does the NSN 3110-01-360-7026 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products