What is the FSCG of the NSN 3110-00-001-4707?

The FSCG of the NSN 3110-00-001-4707 is 3110

Does the NSN 3110-00-001-4707 have a Schedule B code assigned?

Yes, the Schedule B code is 8482800080

Does NSN 3110-00-001-4707 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-001-4707 contain precious materials?

Item does not contain precious metal.

Does NSN 3110-00-001-4707 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3110-00-001-4707 was assigned to the Federal Catalog?

It was assigned 52 年前, on Wed, Sep 27, 1972

MS51151-3 | Aerospace-Bearing

概括

探索軸承的詳細摘要資訊： MS51151-3. 包括 NSN、分類組和識別碼，以支援採購、合規性和準確的零件追蹤。

零件編號: MS51151-3
聯邦供應分類: 3110 未安裝的減摩軸承
（NSN）國家庫存編號: 3110-00-001-4707
商品名稱代碼: 00049
聯邦物品識別指南: A044A0
分配日期: 09/27/1972

一種特殊的單列或多列滾珠軸承，剛性或自調心，採用實心或空心軸構造，具有內部或外部螺紋。

0.4950 inches minimum and 0.5000 inches maximum inner ring width, self-aligning alignment type, 2.0210 inches minimum and 2.0410 inches maximum length from bore center to shank end, contact bearing seal type, 0.1897 inches minimum and 0.1900 inches maximum bore diameter

數據表

以下是軸承的綜合技術規格： 3110-00-001-4707 . 尋找尺寸、材料、公差、性能特徵等。

對齊類型: self-aligning
軸承密封型: contact
孔徑: 0.1897 inches minimum and 0.1900 inches maximum
內圈寬度: 0.4950 inches minimum and 0.5000 inches maximum
從孔中心到柄端的長度: 2.0210 inches minimum and 2.0410 inches maximum
潤滑材料文獻及分類: mil-g-81322 mil spec single material response
潤滑材料: grease
外圈寬度: 0.3920 inches minimum and 0.4070 inches maximum
總長度: 2.5050 inches minimum and 2.5250 inches maximum
總外徑: 0.9590 inches minimum and 0.9790 inches maximum
物料文件及分類: ams 3652 assn std single material response or ams 3666 assn std single material response seal
物料文件及分類: mil-s-6758 mil spec single material response outer ring
物料文件及分類: mil-s-6758 mil spec single material response shaft
物料文件及分類: mil-s-7420 mil spec single material response inner ring
物料文件及分類: mil-s-7420 mil spec single material response ball
材料: plastic polytetrafluoroethylene seal
材料: steel comp 4130 outer ring
材料: steel comp 4130 shaft
材料: steel comp e52100 ball
材料: steel comp e52100 inner ring
公稱螺紋尺寸: 0.375 inches
封條數量: 2
自對準角: 10.00 degrees nominal
自對準定位: internal
柄直徑: 0.3750 inches nominal
柄型: externally threaded
柄螺紋長度: 1.2820 inches minimum and 1.3440 inches maximum
特殊功能: heat stabilized for operation at 250 deg fah
樣式指示器: double row, staggered, ball
表面處理文件及分類: qq-p-416,ty 1,cl 2 fed spec single treatment response outer ring
表面處理文件及分類: qq-p-416,ty 1,cl 2 fed spec single treatment response shaft
表面處理: cadmium outer ring
表面處理: cadmium shaft
Thread 類: 3a
線程方向: right-hand
每英吋螺紋數量: 24
螺紋系列代號: unjf

替換

The NSN 3110-00-001-4707 is used in place of the following discontinued or alternate items:

NSN	姓名	日期
3110-00-173-5066	No Name Available	02/01/1982

常見問題

快速找到有關軸承的常見問題的答案： MS51151-3. 探索技術規格、安裝技巧、維護指南、監管要求和故障排除建議。

What is the FSCG of the NSN 3110-00-001-4707?: The FSCG of the NSN 3110-00-001-4707 is 3110

Does the NSN 3110-00-001-4707 have a Schedule B code assigned?: Yes, the Schedule B code is 8482800080

Does NSN 3110-00-001-4707 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-001-4707 contain precious materials?: Item does not contain precious metal.

Does NSN 3110-00-001-4707 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.