What is the FSCG of the NSN 3110-00-184-9113?

The FSCG of the NSN 3110-00-184-9113 is 3110

Does the NSN 3110-00-184-9113 have a Schedule B code assigned?

Yes, the Schedule B code is 8482105028

Does NSN 3110-00-184-9113 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-184-9113 contain precious materials?

Precious metal content is unknown

Does NSN 3110-00-184-9113 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3110-00-184-9113 was assigned to the Federal Catalog?

It was assigned 53 年前, on Fri, Dec 17, 1971

SR3FMC7P811LYV250LY2313CS280 | Aerospace-Bearing

概括

探索軸承的詳細摘要資訊： SR3FMC7P811LYV250LY2313CS280. 包括 NSN、分類組和識別碼，以支援採購、合規性和準確的零件追蹤。

零件編號: SR3FMC7P811LYV250LY2313CS280
聯邦供應分類: 3110 未安裝的減摩軸承
（NSN）國家庫存編號: 3110-00-184-9113
商品名稱代碼: 00014
聯邦物品識別指南: A044A0
分配日期: 12/17/1971

一種圓柱形裝置，其內圈或外圈繞單排或雙排硬化滾珠轉動，滾珠在兩圈之間滾動順暢，從而最大限度地減少摩擦。對於表面經過特殊研磨以用於雙聯安裝的軸承，請參閱“雙聯滾珠軸承”。不含：機架滾珠軸承。

c44 calibration designator, 0.0420 inches nominal flange width, 0.1875 inches nominal bore diameter, 0.5650 inches nominal flange outside diameter, straight bore shape

數據表

以下是軸承的綜合技術規格： 3110-00-184-9113 . 尋找尺寸、材料、公差、性能特徵等。

孔徑: 0.1875 inches nominal
孔形: straight
校準指示器: c44
法蘭外徑: 0.5650 inches nominal
法蘭寬度: 0.0420 inches nominal
內部間隙: 0.0008 inches minimum radial and 0.0024 inches maximum radial
載荷方向: angular
潤滑材料文獻及分類: mil-g-81322 mil spec 1st material response or xrl743a,fscm 77988 mfr ref 2nd material response
潤滑材料: grease or oil
外圈外徑: 0.5000 inches nominal
總寬度: 0.1562 inches nominal
材料: plastic phenolic retainer
材料: steel corrosion resisting ball
材料: steel corrosion resisting inner ring
材料: steel corrosion resisting outer ring
保持器的製造方法: molded
特殊功能: pack bearing 10 percent full of specified grease also ball contact angle 14 deg min to 25 deg max
標準公差名稱: abec no.7
樣式指示器: shouldered inner ring, separable
表面處理: ground

常見問題

快速找到有關軸承的常見問題的答案： SR3FMC7P811LYV250LY2313CS280. 探索技術規格、安裝技巧、維護指南、監管要求和故障排除建議。

What is the FSCG of the NSN 3110-00-184-9113?: The FSCG of the NSN 3110-00-184-9113 is 3110

Does the NSN 3110-00-184-9113 have a Schedule B code assigned?: Yes, the Schedule B code is 8482105028

Does NSN 3110-00-184-9113 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-184-9113 contain precious materials?: Precious metal content is unknown

Does NSN 3110-00-184-9113 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.