3110-00-187-5666 Rod End Ball Bearing
NSN 的全面規格和應用詳情： 3110-00-187-5666.
概括
探索軸承的詳細摘要資訊： 3110-00-187-5666. 包括 NSN、分類組和識別碼，以支援採購、合規性和準確的零件追蹤。
- 聯邦供應分類
- 3110 未安裝的減摩軸承
- （NSN）國家庫存編號
- 3110-00-187-5666
- 商品名稱代碼
- 00049
- 聯邦物品識別指南
- A044A0
- 分配日期
- 09/08/1972
一種特殊的單列或多列滾珠軸承，剛性或自調心，採用實心或空心軸構造，具有內部或外部螺紋。
1.8650 inches minimum and 1.8850 inches maximum length from bore center to shank end, 0.5880 inches minimum and 0.5930 inches maximum inner ring width, 0.2497 inches minimum and 0.2500 inches maximum bore diameter, self-aligning alignment type, contact bearing seal type
數據表
以下是軸承的綜合技術規格： 3110-00-187-5666 . 尋找尺寸、材料、公差、性能特徵等。
- 對齊類型
- self-aligning
- 軸承密封型
- contact
- 孔徑
- 0.2497 inches minimum and 0.2500 inches maximum
- 內圈寬度
- 0.5880 inches minimum and 0.5930 inches maximum
- 從孔中心到柄端的長度
- 1.8650 inches minimum and 1.8850 inches maximum
- 潤滑材料文獻及分類
- mil-g-81322 mil spec single material response
- 潤滑材料
- grease
- 外圈寬度
- 0.4280 inches minimum and 0.4480 inches maximum
- 總長度
- 2.3240 inches minimum and 2.3640 inches maximum
- 總外徑
- 0.9280 inches minimum and 0.9480 inches maximum
- 物料文件及分類
- ams 3652 assn std single material response or ams 3666 assn std single material response seal
- 物料文件及分類
- mil-s-6758 mil spec single material response outer ring
- 物料文件及分類
- mil-s-6758 mil spec single material response shaft
- 物料文件及分類
- mil-s-7420 mil spec single material response inner ring
- 物料文件及分類
- mil-s-7420 mil spec single material response ball
- 材料
- plastic polytetrafluoroethylene seal
- 材料
- steel comp 4130 outer ring
- 材料
- steel comp 4130 shaft
- 材料
- steel comp e52100 ball
- 材料
- steel comp e52100 inner ring
- 封條數量
- 2
- 自對準角
- 10.00 degrees nominal
- 自對準定位
- internal
- 柄孔深度
- 1.1880 inches minimum and 1.2500 inches maximum
- 柄孔直徑
- 0.3760 inches minimum and 0.3960 inches maximum
- 柄直徑
- 0.6230 inches minimum and 0.6250 inches maximum
- 柄型
- hollow
- 樣式指示器
- double row, staggered, ball
- 表面處理文件及分類
- qq-p-416,ty 1,cl 2 fed spec single treatment response outer ring
- 表面處理文件及分類
- qq-p-416,ty 1,cl 2 fed spec single treatment response rod end body
- 表面處理
- cadmium outer ring
- 表面處理
- cadmium rod end body
替換
The NSN 3110-00-187-5666 is used in place of the following discontinued or alternate items:
| NSN | 姓名 | 日期 |
|---|---|---|
| 3110-00-227-3946 | No Name Available | 10/01/1997 |
| 3110-00-495-5320 | No Name Available | 03/01/1976 |
| 3110-00-826-8230 | No Name Available | 05/01/1997 |
相关轴承
探索与此 NSN 相关的各种轴承模型。点击下面的任何轴承，查看详细的技术数据、性能等级和应用指南。
| 零件編號 | 姓名 |
|---|---|
| 43P4H6FS464 | Rod End Ball Bearing |
| AS21152 | Rod End Ball Bearing |
| MS21152-2 | Rod End Ball Bearing |
| RE4H6-2 | Rod End Ball Bearing |
| REP3H6 | Rod End Ball Bearing |
| REP3MR3FS381 | Rod End Ball Bearing |
| REP4H6-2F | Rod End Ball Bearing |
常見問題
快速找到有關軸承的常見問題的答案： 3110-00-187-5666. 探索技術規格、安裝技巧、維護指南、監管要求和故障排除建議。
- What is the FSCG of the NSN 3110-00-187-5666?
- The FSCG of the NSN 3110-00-187-5666 is 3110
- Does the NSN 3110-00-187-5666 have a Schedule B code assigned?
- Yes, the Schedule B code is 8482800080
- Does NSN 3110-00-187-5666 require demilitarization?
- Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
- Does NSN 3110-00-187-5666 contain precious materials?
- Precious metal content is unknown
- Does NSN 3110-00-187-5666 contain hazardous materials?
- Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
- When the NSN 3110-00-187-5666 was assigned to the Federal Catalog?
- It was assigned 54 年前, on Fri, Sep 8, 1972