What is the FSCG of the NSN 3110-00-293-8567?

The FSCG of the NSN 3110-00-293-8567 is 3110

Does the NSN 3110-00-293-8567 have a Schedule B code assigned?

Yes, the Schedule B code is 8482105028

Does NSN 3110-00-293-8567 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-293-8567 contain precious materials?

Item does not contain precious metal.

Does NSN 3110-00-293-8567 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3110-00-293-8567 was assigned to the Federal Catalog?

It was assigned 62 年前, on Tue, Jan 1, 1963

Z126X19V11G32-25-45MG | Aerospace-Bearing

概括

探索軸承的詳細摘要資訊： Z126X19V11G32-25-45MG. 包括 NSN、分類組和識別碼，以支援採購、合規性和準確的零件追蹤。

零件編號: Z126X19V11G32-25-45MG
聯邦供應分類: 3110 未安裝的減摩軸承
（NSN）國家庫存編號: 3110-00-293-8567
商品名稱代碼: 00014
聯邦物品識別指南: A044A0
分配日期: 01/01/1963

一種圓柱形裝置，其內圈或外圈繞單排或雙排硬化滾珠轉動，滾珠在兩圈之間滾動順暢，從而最大限度地減少摩擦。對於表面經過特殊研磨以用於雙聯安裝的軸承，請參閱“雙聯滾珠軸承”。不含：機架滾珠軸承。

19.4 degrees minimum and 26.8 degrees maximum contact angle, 0.6280 inches minimum and 0.6300 inches maximum flange outside diameter, rigid alignment type, 0.1875 inches minimum and 0.1877 inches maximum bore diameter, straight bore shape

數據表

以下是軸承的綜合技術規格： 3110-00-293-8567 . 尋找尺寸、材料、公差、性能特徵等。

對齊類型: rigid
孔徑: 0.1875 inches minimum and 0.1877 inches maximum
孔形: straight
接觸角: 19.4 degrees minimum and 26.8 degrees maximum
法蘭外徑: 0.6280 inches minimum and 0.6300 inches maximum
法蘭寬度: 0.0560 inches minimum and 0.0590 inches maximum
內部間隙: 0.0017 inches minimum radial and 0.0024 inches maximum radial
載荷方向: angular
潤滑材料文獻及分類: mil-g-81322 mil spec single material response
潤滑材料: grease
外圈外徑: 0.5630 inches minimum and 0.5632 inches maximum
總寬度: 0.2490 inches minimum and 0.2510 inches maximum
物料文件及分類: s-2058,cage 35351 mfr ref single material response ball
物料文件及分類: s-2058,cage 35351 mfr ref single material response inner ring
物料文件及分類: s-2058,cage 35351 mfr ref single material response outer ring
材料: plastic phenolic retainer
材料: steel ball
材料: steel corrosion resisting shield
材料: steel inner ring
材料: steel outer ring
保持器的製造方法: machined
盾牌數量: 2
標準公差名稱: abec no.9
特殊功能: retainer vacuum impregnated with oil per sm2049-02,cage 35351
樣式指示器: shouldered inner ring, separable
表面處理: ground

替換

The NSN 3110-00-293-8567 is used in place of the following discontinued or alternate items:

NSN	姓名	日期
3110-00-006-6630	No Name Available	04/01/1974
3110-00-591-7220	No Name Available	10/26/1972

常見問題

快速找到有關軸承的常見問題的答案： Z126X19V11G32-25-45MG. 探索技術規格、安裝技巧、維護指南、監管要求和故障排除建議。

What is the FSCG of the NSN 3110-00-293-8567?: The FSCG of the NSN 3110-00-293-8567 is 3110

Does the NSN 3110-00-293-8567 have a Schedule B code assigned?: Yes, the Schedule B code is 8482105028

Does NSN 3110-00-293-8567 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-293-8567 contain precious materials?: Item does not contain precious metal.

Does NSN 3110-00-293-8567 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.