364981-3 Bearing Retaining Plate
综合规格和应用细节: 364981-3 Bearing Retaining Plate.
概括
探索軸承的詳細摘要資訊： 364981-3. 包括 NSN、分類組和識別碼，以支援採購、合規性和準確的零件追蹤。
- 零件編號
- 364981-3
- 聯邦供應分類
- 3110 未安裝的減摩軸承
- （NSN）國家庫存編號
- 3110-00-332-9102
- 商品名稱代碼
- 22293
- 聯邦物品識別指南
- A093A0
- 分配日期
- 12/16/1973
一種相對扁平的剛性部件，帶或不帶中心孔，用於將環形軸承或套筒軸承固定在合適的外殼中。必須附有用於安裝的鑽孔和/或螺紋孔。不含：端蓋、電動旋轉設備。
0.480 inches minimum and 0.520 inches maximum aperture diameter, 0.275 inches minimum and 0.305 inches maximum countersink diameter, 0.460 inches nominal distance from horizontal centerline to center of lower hole, 99.0 degrees minimum and 101.0 degrees maximum countersink angle, raised surface w/ aperture cross-sectional shape style
數據表
以下是軸承的綜合技術規格： 3110-00-332-9102 . 尋找尺寸、材料、公差、性能特徵等。
- 水平中心線至下孔中心距離
- 0.460 inches nominal
- 孔徑
- 0.480 inches minimum and 0.520 inches maximum
- 沉頭孔角度
- 99.0 degrees minimum and 101.0 degrees maximum
- 埋頭孔直徑
- 0.275 inches minimum and 0.305 inches maximum
- 橫斷面形狀樣式
- raised surface w/ aperture
- 寬度方向孔距
- 0.920 inches nominal
- 接線片數量
- 2
- 凸耳寬度
- 0.380 inches nominal
- 外徑
- 0.800 inches nominal
- 外凸面直徑
- 0.620 inches minimum and 0.624 inches maximum
- 總厚度
- 0.130 inches nominal
- 物料文件及分類
- qq-a-225/8 fed spec 1st material response or mil-a-21180 mil spec 2nd material response overall
- 材料
- aluminum alloy 6061 or aluminum alloy a356.0 overall
- 安裝孔排列方式
- vertical centerline
- 安裝孔直徑
- 0.166 inches minimum and 0.175 inches maximum
- 安裝孔類型
- round, unthreaded, countersunk
- 升高表面高度
- 0.045 inches minimum and 0.055 inches maximum
- 從板中心到凸耳末端的半徑
- 0.650 inches nominal
- 樣式指示器
- round with lugs
- 表面處理文件及分類
- mil-a-8625 mil spec single treatment response overall
- 表面處理
- anodize overall
常見問題
快速找到有關軸承的常見問題的答案： 364981-3. 探索技術規格、安裝技巧、維護指南、監管要求和故障排除建議。
- What is the FSCG of the NSN 3110-00-332-9102?
- The FSCG of the NSN 3110-00-332-9102 is 3110
- Does the NSN 3110-00-332-9102 have a Schedule B code assigned?
- Yes, the Schedule B code is 8482997090
- Does NSN 3110-00-332-9102 require demilitarization?
- "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"
- Does NSN 3110-00-332-9102 contain precious materials?
- Precious metal content is unknown
- Does NSN 3110-00-332-9102 contain hazardous materials?
- Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
- When the NSN 3110-00-332-9102 was assigned to the Federal Catalog?
- It was assigned 52 年前, on Sun, Dec 16, 1973