What is the FSCG of the NSN 3110-00-519-7127?

The FSCG of the NSN 3110-00-519-7127 is 3110

Does the NSN 3110-00-519-7127 have a Schedule B code assigned?

Yes, the Schedule B code is 8482500000

Does NSN 3110-00-519-7127 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-519-7127 contain precious materials?

Precious metal content is unknown

Does NSN 3110-00-519-7127 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3110-00-519-7127 was assigned to the Federal Catalog?

It was assigned 50 年前, on Fri, Aug 16, 1974

SM4-6M24 | Aerospace-Bearing

概括

探索軸承的詳細摘要資訊： SM4-6M24. 包括 NSN、分類組和識別碼，以支援採購、合規性和準確的零件追蹤。

零件編號: SM4-6M24
聯邦供應分類: 3110 未安裝的減摩軸承
（NSN）國家庫存編號: 3110-00-519-7127
商品名稱代碼: 00050
聯邦物品識別指南: A044A0
分配日期: 08/16/1974

一種特殊的單列或多列滾子軸承，剛性或自調心，並採用內螺紋、空心、梅花螺紋或實心軸構造。

0.4950 inches minimum and 0.5000 inches maximum inner ring width, 0.2495 inches minimum and 0.2500 inches maximum bore diameter, self-aligning alignment type, 1.8650 inches minimum and 1.8950 inches maximum length from bore center to shank end, contact bearing seal type

數據表

以下是軸承的綜合技術規格： 3110-00-519-7127 . 尋找尺寸、材料、公差、性能特徵等。

對齊類型: self-aligning
軸承密封型: contact
孔徑: 0.2495 inches minimum and 0.2500 inches maximum
內圈寬度: 0.4950 inches minimum and 0.5000 inches maximum
從孔中心到柄端的長度: 1.8650 inches minimum and 1.8950 inches maximum
潤滑材料文獻及分類: mil-g-23827 mil spec single material response
潤滑材料: grease
外圈寬度: 0.3450 inches minimum and 0.3600 inches maximum
總長度: 2.4050 inches maximum
總外徑: 0.9700 inches minimum and 1.0200 inches maximum
物料文件及分類: mil-s-7420 mil spec single material response inner ring
物料文件及分類: mil-s-7420 mil spec single material response roller
物料文件及分類: mil-s-7493 mil spec single material response rod end body
物料文件及分類: qq-s-763 fed spec single material response shield
材料: plastic polytetrafluoroethylene seal
材料: steel comp 430 shield
材料: steel comp 4620 rod end body
材料: steel snap ring
材料: steel comp e52100 inner ring
材料: steel comp e52100 roller
公稱螺紋尺寸: 0.375 inches
封條數量: 2
自對準角: 10.00 degrees nominal
自對準定位: internal
柄直徑: 0.3750 inches maximum
柄型: externally threaded
柄螺紋長度: 1.0600 inches minimum and 1.1200 inches maximum
盾牌數量: 2
特殊功能: nas559 keyway in shank,radial internal clearance 0.0002 in. min 0.0010 in. max
樣式指示器: single row, concave rollers
表面處理文件及分類: qq-p-416,ty 1,cl 2 fed spec single treatment response all external/exposed metal surfaces
表面處理: cadmium all external/exposed metal surfaces
Thread 類: 3a
線程方向: right-hand
每英吋螺紋數量: 24
螺紋系列代號: unjf

常見問題

快速找到有關軸承的常見問題的答案： SM4-6M24. 探索技術規格、安裝技巧、維護指南、監管要求和故障排除建議。

What is the FSCG of the NSN 3110-00-519-7127?: The FSCG of the NSN 3110-00-519-7127 is 3110

Does the NSN 3110-00-519-7127 have a Schedule B code assigned?: Yes, the Schedule B code is 8482500000

Does NSN 3110-00-519-7127 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-519-7127 contain precious materials?: Precious metal content is unknown

Does NSN 3110-00-519-7127 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.