What is the FSCG of the NSN 3110-00-725-2511?

The FSCG of the NSN 3110-00-725-2511 is 3110

Does the NSN 3110-00-725-2511 have a Schedule B code assigned?

Yes, the Schedule B code is 8482105028

Does NSN 3110-00-725-2511 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-725-2511 contain precious materials?

Precious metal content is unknown

Does NSN 3110-00-725-2511 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3110-00-725-2511 was assigned to the Federal Catalog?

It was assigned 64 年前, on Sun, Jan 1, 1961

R3SSZAX306-0-11 | Aerospace-Bearing

概括

探索軸承的詳細摘要資訊： R3SSZAX306-0-11. 包括 NSN、分類組和識別碼，以支援採購、合規性和準確的零件追蹤。

零件編號: R3SSZAX306-0-11
聯邦供應分類: 3110 未安裝的減摩軸承
（NSN）國家庫存編號: 3110-00-725-2511
商品名稱代碼: 00014
聯邦物品識別指南: A044A0
分配日期: 01/01/1961

一種圓柱形裝置，其內圈或外圈繞單排或雙排硬化滾珠轉動，滾珠在兩圈之間滾動順暢，從而最大限度地減少摩擦。對於表面經過特殊研磨以用於雙聯安裝的軸承，請參閱“雙聯滾珠軸承”。不含：機架滾珠軸承。

straight bore shape, tight internal fit-up designation, 0.0000 inches minimum radial and 0.0003 inches maximum radial internal clearance, 16.5 degrees nominal contact angle, 0.1875 inches nominal bore diameter

數據表

以下是軸承的綜合技術規格： 3110-00-725-2511 . 尋找尺寸、材料、公差、性能特徵等。

孔徑: 0.1875 inches nominal
孔形: straight
接觸角: 16.5 degrees nominal
內部間隙: 0.0000 inches minimum radial and 0.0003 inches maximum radial
內部裝修名稱: tight
內部配合接觸角方向: inward convergent
載荷方向: angular
潤滑材料文獻及分類: mil-l-6085 mil spec single material response
潤滑材料: oil
總外徑: 0.5000 inches nominal
總寬度: 0.1562 inches nominal
材料: steel ball
材料: steel corrosion resisting retainer
材料: steel corrosion resisting shield
材料: steel inner ring
材料: steel outer ring
保持器的製造方法: coiled
盾牌數量: 2
特殊功能: internal clearance measured under a 1/2 lb reversing load; spring seperators,shields and wires of 302 stainless steel; other special features
標準公差名稱: abec no.7
樣式指示器: non-loading groove, non-separable
表面處理: ground

替換

The NSN 3110-00-725-2511 is used in place of the following discontinued or alternate items:

NSN	姓名	日期
3110-00-006-6621	No Name Available	04/01/1974
3110-00-902-1041	No Name Available	11/01/2013

常見問題

快速找到有關軸承的常見問題的答案： R3SSZAX306-0-11. 探索技術規格、安裝技巧、維護指南、監管要求和故障排除建議。

What is the FSCG of the NSN 3110-00-725-2511?: The FSCG of the NSN 3110-00-725-2511 is 3110

Does the NSN 3110-00-725-2511 have a Schedule B code assigned?: Yes, the Schedule B code is 8482105028

Does NSN 3110-00-725-2511 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-725-2511 contain precious materials?: Precious metal content is unknown

Does NSN 3110-00-725-2511 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.