What is the FSCG of the NSN 3110-00-799-9145?

The FSCG of the NSN 3110-00-799-9145 is 3110

Does the NSN 3110-00-799-9145 have a Schedule B code assigned?

Yes, the Schedule B code is 8482800080

Does NSN 3110-00-799-9145 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-799-9145 contain precious materials?

Precious metal content is unknown

Does NSN 3110-00-799-9145 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3110-00-799-9145 was assigned to the Federal Catalog?

It was assigned 63 年前, on Mon, Jan 1, 1962

GB525J4BF | Aerospace-Bearing

概括

探索軸承的詳細摘要資訊： GB525J4BF. 包括 NSN、分類組和識別碼，以支援採購、合規性和準確的零件追蹤。

零件編號: GB525J4BF
聯邦供應分類: 3110 未安裝的減摩軸承
（NSN）國家庫存編號: 3110-00-799-9145
商品名稱代碼: 00049
聯邦物品識別指南: A044A0
分配日期: 01/01/1962

一種特殊的單列或多列滾珠軸承，剛性或自調心，採用實心或空心軸構造，具有內部或外部螺紋。

self-aligning alignment type, 0.2497 inches minimum and 0.2500 inches maximum bore diameter, contact bearing seal type, 1.8650 inches minimum and 1.8850 inches maximum length from bore center to shank end, 0.5880 inches minimum and 0.5930 inches maximum inner ring width

數據表

以下是軸承的綜合技術規格： 3110-00-799-9145 . 尋找尺寸、材料、公差、性能特徵等。

對齊類型: self-aligning
軸承密封型: contact
孔徑: 0.2497 inches minimum and 0.2500 inches maximum
內圈寬度: 0.5880 inches minimum and 0.5930 inches maximum
從孔中心到柄端的長度: 1.8650 inches minimum and 1.8850 inches maximum
潤滑材料文獻及分類: mil-g-23827 mil spec single material response
潤滑材料: grease
外圈寬度: 0.4280 inches minimum and 0.4480 inches maximum
總長度: 2.3340 inches minimum and 2.3540 inches maximum
總外徑: 0.9280 inches minimum and 0.9480 inches maximum
材料: rubber synthetic seal
材料: steel ball
材料: steel inner ring
材料: steel outer ring
材料: steel shaft
封條數量: 2
自對準角: 10.00 degrees nominal
自對準定位: internal
柄孔深度: 1.2190 inches nominal
柄孔直徑: 0.3860 inches nominal
柄直徑: 0.6230 inches minimum and 0.6250 inches maximum
柄型: hollow
特殊功能: shank filled with narco no. 3119 putty
樣式指示器: double row, staggered, ball
表面處理: cadmium all external/exposed metal surfaces

常見問題

快速找到有關軸承的常見問題的答案： GB525J4BF. 探索技術規格、安裝技巧、維護指南、監管要求和故障排除建議。

What is the FSCG of the NSN 3110-00-799-9145?: The FSCG of the NSN 3110-00-799-9145 is 3110

Does the NSN 3110-00-799-9145 have a Schedule B code assigned?: Yes, the Schedule B code is 8482800080

Does NSN 3110-00-799-9145 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-799-9145 contain precious materials?: Precious metal content is unknown

Does NSN 3110-00-799-9145 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.