What is the FSCG of the NSN 3110-00-801-7007?

The FSCG of the NSN 3110-00-801-7007 is 3110

Does the NSN 3110-00-801-7007 have a Schedule B code assigned?

Yes, the Schedule B code is 8482800080

Does NSN 3110-00-801-7007 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-801-7007 contain precious materials?

Precious metal content is unknown

Does NSN 3110-00-801-7007 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3110-00-801-7007 was assigned to the Federal Catalog?

It was assigned 63 年前, on Mon, Jan 1, 1962

REP3F4-4FS210 | Aerospace-Bearing

概括

探索軸承的詳細摘要資訊： REP3F4-4FS210. 包括 NSN、分類組和識別碼，以支援採購、合規性和準確的零件追蹤。

零件編號: REP3F4-4FS210
聯邦供應分類: 3110 未安裝的減摩軸承
（NSN）國家庫存編號: 3110-00-801-7007
商品名稱代碼: 00049
聯邦物品識別指南: A044A0
分配日期: 01/01/1962

一種特殊的單列或多列滾珠軸承，剛性或自調心，採用實心或空心軸構造，具有內部或外部螺紋。

rigid alignment type, 0.1897 inches minimum and 0.1900 inches maximum bore diameter, 0.4370 inches nominal inner ring width, contact bearing seal type, 1.3750 inches nominal length from bore center to shank end

數據表

以下是軸承的綜合技術規格： 3110-00-801-7007 . 尋找尺寸、材料、公差、性能特徵等。

對齊類型: rigid
軸承密封型: contact
孔徑: 0.1897 inches minimum and 0.1900 inches maximum
內圈寬度: 0.4370 inches nominal
從孔中心到柄端的長度: 1.3750 inches nominal
潤滑材料文獻及分類: mil-g-23827 mil spec single material response
潤滑材料: grease
外圈寬度: 0.3280 inches nominal
總長度: 1.7660 inches nominal
總外徑: 0.7810 inches nominal
材料: rubber synthetic seal
材料: steel ball
材料: steel inner ring
材料: steel outer ring
材料: steel shaft
公稱螺紋尺寸: 0.250 inches
封條數量: 2
自對準角: 10.00 degrees nominal
柄直徑: 0.3750 inches nominal
柄型: internally threaded w/bead
柄螺紋長度: 0.7500 inches nominal
特殊功能: 0.0700 in. hole drilled thru shank end; heat treated shank 90000 to 150000 psi tensile
對邊寬度: 0.3650 inches minimum and 0.3770 inches maximum
樣式指示器: double row, staggered, ball
表面處理: cadmium all external/exposed metal surfaces
Thread 類: 3b
線程方向: right-hand
每英吋螺紋數量: 28
螺紋系列代號: unf

常見問題

快速找到有關軸承的常見問題的答案： REP3F4-4FS210. 探索技術規格、安裝技巧、維護指南、監管要求和故障排除建議。

What is the FSCG of the NSN 3110-00-801-7007?: The FSCG of the NSN 3110-00-801-7007 is 3110

Does the NSN 3110-00-801-7007 have a Schedule B code assigned?: Yes, the Schedule B code is 8482800080

Does NSN 3110-00-801-7007 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-801-7007 contain precious materials?: Precious metal content is unknown

Does NSN 3110-00-801-7007 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.