S418FCP25 Annular Ball Bearing
综合规格和应用细节: S418FCP25 Annular Ball Bearing.
概括
探索軸承的詳細摘要資訊： S418FCP25. 包括 NSN、分類組和識別碼，以支援採購、合規性和準確的零件追蹤。
- 零件編號
- S418FCP25
- 聯邦供應分類
- 3110 未安裝的減摩軸承
- （NSN）國家庫存編號
- 3110-01-015-9708
- 商品名稱代碼
- 00014
- 聯邦物品識別指南
- A044A0
- 分配日期
- 01/31/1976
一種圓柱形裝置，其內圈或外圈繞單排或雙排硬化滾珠轉動，滾珠在兩圈之間滾動順暢，從而最大限度地減少摩擦。對於表面經過特殊研磨以用於雙聯安裝的軸承，請參閱“雙聯滾珠軸承”。不含：機架滾珠軸承。
0.0230 inches nominal flange width, 0.1250 inches nominal bore diameter, caa calibration designator, straight bore shape, 0.2960 inches nominal flange outside diameter
數據表
以下是軸承的綜合技術規格： 3110-01-015-9708 . 尋找尺寸、材料、公差、性能特徵等。
- 孔徑
- 0.1250 inches nominal
- 孔形
- straight
- 校準指示器
- caa
- 法蘭外徑
- 0.2960 inches nominal
- 法蘭寬度
- 0.0230 inches nominal
- 內部間隙
- 0.0002 inches minimum radial and 0.0005 inches maximum radial
- 載荷方向
- radial
- 潤滑材料文獻及分類
- mil-l-6085 mil spec single material response
- 潤滑材料
- oil
- 外圈外徑
- 0.2500 inches nominal
- 總寬度
- 0.0937 inches nominal
- 材料
- steel comp 440c overall
- 保持器的製造方法
- stamped
- 標準公差名稱
- abec no.7
- 特殊功能
- running torque 4800 mg mm max,barrier coated
- 樣式指示器
- non-loading groove, non-separable
- 表面處理
- ground
常見問題
快速找到有關軸承的常見問題的答案： S418FCP25. 探索技術規格、安裝技巧、維護指南、監管要求和故障排除建議。
- What is the FSCG of the NSN 3110-01-015-9708?
- The FSCG of the NSN 3110-01-015-9708 is 3110
- Does the NSN 3110-01-015-9708 have a Schedule B code assigned?
- Yes, the Schedule B code is 8482105028
- Does NSN 3110-01-015-9708 require demilitarization?
- Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
- Does NSN 3110-01-015-9708 contain precious materials?
- Precious metal content is unknown
- Does NSN 3110-01-015-9708 contain hazardous materials?
- Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
- When the NSN 3110-01-015-9708 was assigned to the Federal Catalog?
- It was assigned 50 年前, on Sat, Jan 31, 1976