What is the FSCG of the NSN 3110-01-042-2908?

The FSCG of the NSN 3110-01-042-2908 is 3110

Does the NSN 3110-01-042-2908 have a Schedule B code assigned?

Yes, the Schedule B code is 8482105028

Does NSN 3110-01-042-2908 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-01-042-2908 contain precious materials?

Item does not contain precious metal.

Does NSN 3110-01-042-2908 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3110-01-042-2908 was assigned to the Federal Catalog?

It was assigned 48 年前, on Wed, Jun 8, 1977

22539-6 | Aerospace-Bearing

概括

探索軸承的詳細摘要資訊： 22539-6. 包括 NSN、分類組和識別碼，以支援採購、合規性和準確的零件追蹤。

零件編號: 22539-6
聯邦供應分類: 3110 未安裝的減摩軸承
（NSN）國家庫存編號: 3110-01-042-2908
商品名稱代碼: 00014
聯邦物品識別指南: A044A0
分配日期: 06/08/1977

一種圓柱形裝置，其內圈或外圈繞單排或雙排硬化滾珠轉動，滾珠在兩圈之間滾動順暢，從而最大限度地減少摩擦。對於表面經過特殊研磨以用於雙聯安裝的軸承，請參閱“雙聯滾珠軸承”。不含：機架滾珠軸承。

contact bearing seal type, zzzy criticality code justification, straight bore shape, 17.0 millimeters nominal bore diameter, standard internal fit-up designation

數據表

以下是軸承的綜合技術規格： 3110-01-042-2908 . 尋找尺寸、材料、公差、性能特徵等。

軸承密封型: contact
孔徑: 17.0 millimeters nominal
孔形: straight
關鍵性程式碼論證: zzzy
內部裝修名稱: standard
載荷方向: radial
潤滑材料文獻及分類: mil-l-15719 mil spec single material response
潤滑材料: grease
總外徑: 40.0 millimeters nominal
總寬度: 12.0 millimeters nominal
材料: rubber synthetic seal
材料: steel ball
材料: steel inner ring
材料: steel outer ring
材料: steel retainer
參考編號區分特徵: as differentiated by material which must conform to ships parts control center special quality control provisions
保持器的製造方法: pressed
封條數量: 2
特殊測試功能: special quality control testing
標準公差名稱: abec no.1
樣式指示器: non-loading groove, non-separable
表面處理: ground
測試資料文檔: "81349-mil-p-21299 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

常見問題

快速找到有關軸承的常見問題的答案： 22539-6. 探索技術規格、安裝技巧、維護指南、監管要求和故障排除建議。

What is the FSCG of the NSN 3110-01-042-2908?: The FSCG of the NSN 3110-01-042-2908 is 3110

Does the NSN 3110-01-042-2908 have a Schedule B code assigned?: Yes, the Schedule B code is 8482105028

Does NSN 3110-01-042-2908 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-01-042-2908 contain precious materials?: Item does not contain precious metal.

Does NSN 3110-01-042-2908 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.