What is the FSCG of the NSN 3110-01-089-1620?

The FSCG of the NSN 3110-01-089-1620 is 3110

Does the NSN 3110-01-089-1620 have a Schedule B code assigned?

Yes, the Schedule B code is 8482105028

Does NSN 3110-01-089-1620 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-01-089-1620 contain precious materials?

Precious metal content is unknown

Does NSN 3110-01-089-1620 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3110-01-089-1620 was assigned to the Federal Catalog?

It was assigned 45 年前, on Sat, Jan 26, 1980

K0B020XP0L | Aerospace-Bearing

概括

探索軸承的詳細摘要資訊： K0B020XP0L. 包括 NSN、分類組和識別碼，以支援採購、合規性和準確的零件追蹤。

零件編號: K0B020XP0L
聯邦供應分類: 3110 未安裝的減摩軸承
（NSN）國家庫存編號: 3110-01-089-1620
商品名稱代碼: 00014
聯邦物品識別指南: A044A0
分配日期: 01/26/1980

一種圓柱形裝置，其內圈或外圈繞單排或雙排硬化滾珠轉動，滾珠在兩圈之間滾動順暢，從而最大限度地減少摩擦。對於表面經過特殊研磨以用於雙聯安裝的軸承，請參閱“雙聯滾珠軸承”。不含：機架滾珠軸承。

primarily radial internal fit-up contact angular direction, radial load direction, 1.9982 inches minimum and 2.0000 inches maximum bore diameter, 30.0 degrees nominal contact angle, straight bore shape

數據表

以下是軸承的綜合技術規格： 3110-01-089-1620 . 尋找尺寸、材料、公差、性能特徵等。

孔徑: 1.9982 inches minimum and 2.0000 inches maximum
孔形: straight
接觸角: 30.0 degrees nominal
內部配合接觸角方向: primarily radial
載荷方向: radial
潤滑材料文獻及分類: mil-l-3150 mil spec single material response
潤滑材料: oil
總外徑: 2.6232 inches minimum and 2.6250 inches maximum
總寬度: 0.3075 inches minimum and 0.3125 inches maximum
物料文件及分類: 66 fed std single material response ball
物料文件及分類: 66 fed std single material response inner ring
物料文件及分類: 66 fed std single material response outer ring
物料文件及分類: qq-b-613 fed spec all material responses or sae assn std all material responses retainer
材料: copper alloy retainer
材料: steel comp e52100 ball
材料: steel comp e52100 inner ring
材料: steel comp e52100 outer ring
保持器的製造方法: machined
特殊功能: 0.0000 in. min 0.0010 in. max diametral preload
樣式指示器: 4 point ball contact, solid inner and outer rings, non-separable
表面處理: ground

常見問題

快速找到有關軸承的常見問題的答案： K0B020XP0L. 探索技術規格、安裝技巧、維護指南、監管要求和故障排除建議。

What is the FSCG of the NSN 3110-01-089-1620?: The FSCG of the NSN 3110-01-089-1620 is 3110

Does the NSN 3110-01-089-1620 have a Schedule B code assigned?: Yes, the Schedule B code is 8482105028

Does NSN 3110-01-089-1620 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-01-089-1620 contain precious materials?: Precious metal content is unknown

Does NSN 3110-01-089-1620 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.