What is the FSCG of the NSN 3110-01-095-7682?

The FSCG of the NSN 3110-01-095-7682 is 3110

Does the NSN 3110-01-095-7682 have a Schedule B code assigned?

Yes, the Schedule B code is 8482105028

Does NSN 3110-01-095-7682 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-01-095-7682 contain precious materials?

Precious metal content is unknown

Does NSN 3110-01-095-7682 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3110-01-095-7682 was assigned to the Federal Catalog?

It was assigned 45 年前, on Thu, Jun 5, 1980

SR4FCHH5 | Aerospace-Bearing

概括

探索軸承的詳細摘要資訊： SR4FCHH5. 包括 NSN、分類組和識別碼，以支援採購、合規性和準確的零件追蹤。

零件編號: SR4FCHH5
聯邦供應分類: 3110 未安裝的減摩軸承
（NSN）國家庫存編號: 3110-01-095-7682
商品名稱代碼: 00014
聯邦物品識別指南: A044A0
分配日期: 06/05/1980

一種圓柱形裝置，其內圈或外圈繞單排或雙排硬化滾珠轉動，滾珠在兩圈之間滾動順暢，從而最大限度地減少摩擦。對於表面經過特殊研磨以用於雙聯安裝的軸承，請參閱“雙聯滾珠軸承”。不含：機架滾珠軸承。

0.0001 inches minimum radial and 0.0008 inches maximum radial internal clearance, 0.0020 inches minimum and 0.0420 inches maximum flange width, 0.2498 inches minimum and 0.2500 inches maximum bore diameter, 0.6890 inches minimum and 0.6900 inches maximum flange outside diameter, straight bore shape

數據表

以下是軸承的綜合技術規格： 3110-01-095-7682 . 尋找尺寸、材料、公差、性能特徵等。

孔徑: 0.2498 inches minimum and 0.2500 inches maximum
孔形: straight
法蘭外徑: 0.6890 inches minimum and 0.6900 inches maximum
法蘭寬度: 0.0020 inches minimum and 0.0420 inches maximum
內部間隙: 0.0001 inches minimum radial and 0.0008 inches maximum radial
載荷方向: radial
潤滑材料文獻及分類: mil-g-23827 mil spec single material response
潤滑材料: grease
外圈外徑: 0.6248 inches minimum and 0.6250 inches maximum
總寬度: 0.1950 inches minimum and 0.1960 inches maximum
物料文件及分類: s313-13,12511 mfr ref all material responses ball
物料文件及分類: s313-13,12511 mfr ref all material responses inner ring
物料文件及分類: s313-13,12511 mfr ref all material responses outer ring
物料文件及分類: s313-13,12511 mfr ref all material responses retainer
物料文件及分類: s313-13,12511 mfr ref all material responses shield
材料: steel ball
材料: steel inner ring
材料: steel outer ring
材料: steel retainer
材料: steel shield
保持器的製造方法: pressed
盾牌數量: 2
標準公差名稱: abec no. 5p
特殊功能: stabilized for operation at 500 deg f,packed 25 pct full w/lubricant
樣式指示器: non-loading groove, non-separable
表面處理: ground
測試資料文檔: 12511-s313-13 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

常見問題

快速找到有關軸承的常見問題的答案： SR4FCHH5. 探索技術規格、安裝技巧、維護指南、監管要求和故障排除建議。

What is the FSCG of the NSN 3110-01-095-7682?: The FSCG of the NSN 3110-01-095-7682 is 3110

Does the NSN 3110-01-095-7682 have a Schedule B code assigned?: Yes, the Schedule B code is 8482105028

Does NSN 3110-01-095-7682 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-01-095-7682 contain precious materials?: Precious metal content is unknown

Does NSN 3110-01-095-7682 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.