What is the FSCG of the NSN 3110-01-101-0805?

The FSCG of the NSN 3110-01-101-0805 is 3110

Does the NSN 3110-01-101-0805 have a Schedule B code assigned?

Yes, the Schedule B code is 8482105028

Does NSN 3110-01-101-0805 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-01-101-0805 contain precious materials?

Precious metal content is unknown

Does NSN 3110-01-101-0805 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3110-01-101-0805 was assigned to the Federal Catalog?

It was assigned 44 年前, on Fri, Sep 19, 1980

R2B | Aerospace-Bearing

概括

探索軸承的詳細摘要資訊： R2B. 包括 NSN、分類組和識別碼，以支援採購、合規性和準確的零件追蹤。

零件編號: R2B
聯邦供應分類: 3110 未安裝的減摩軸承
（NSN）國家庫存編號: 3110-01-101-0805
商品名稱代碼: 00014
聯邦物品識別指南: A044A0
分配日期: 09/19/1980

一種圓柱形裝置，其內圈或外圈繞單排或雙排硬化滾珠轉動，滾珠在兩圈之間滾動順暢，從而最大限度地減少摩擦。對於表面經過特殊研磨以用於雙聯安裝的軸承，請參閱“雙聯滾珠軸承”。不含：機架滾珠軸承。

25.0 degrees maximum contact angle, standard internal fit-up designation, primarily radial internal fit-up contact angular direction, 0.1248 inches minimum and 0.1250 inches maximum bore diameter, straight bore shape

數據表

以下是軸承的綜合技術規格： 3110-01-101-0805 . 尋找尺寸、材料、公差、性能特徵等。

孔徑: 0.1248 inches minimum and 0.1250 inches maximum
孔形: straight
接觸角: 25.0 degrees maximum
內部裝修名稱: standard
內部配合接觸角方向: primarily radial
載荷方向: angular
潤滑材料文獻及分類: mil-l-6085 mil spec single material response
潤滑材料: oil
總外徑: 0.3748 inches minimum and 0.3750 inches maximum
總寬度: 0.1552 inches minimum and 0.1562 inches maximum
物料文件及分類: mil-s-7420 mil spec 1st material response or qq-s-763 fed spec 2nd material response ball
物料文件及分類: mil-s-7420 mil spec 1st material response or qq-s-763 fed spec 2nd material response inner ring
物料文件及分類: mil-s-7420 mil spec 1st material response or qq-s-763 fed spec 2nd material response outer ring
材料: steel comp e52100 or steel comp 440c ball
材料: steel comp e52100 or steel comp 440c inner ring
材料: steel comp e52100 or steel comp 440c outer ring
保持器的製造方法: machined
樣式指示器: shouldered inner ring, separable
表面處理: ground

替換

The NSN 3110-01-101-0805 is used in place of the following discontinued or alternate items:

NSN	姓名	日期
3110-00-823-9234	No Name Available	11/01/1997

常見問題

快速找到有關軸承的常見問題的答案： R2B. 探索技術規格、安裝技巧、維護指南、監管要求和故障排除建議。

What is the FSCG of the NSN 3110-01-101-0805?: The FSCG of the NSN 3110-01-101-0805 is 3110

Does the NSN 3110-01-101-0805 have a Schedule B code assigned?: Yes, the Schedule B code is 8482105028

Does NSN 3110-01-101-0805 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-01-101-0805 contain precious materials?: Precious metal content is unknown

Does NSN 3110-01-101-0805 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.