What is the FSCG of the NSN 3110-01-210-4004?

The FSCG of the NSN 3110-01-210-4004 is 3110

Does the NSN 3110-01-210-4004 have a Schedule B code assigned?

Yes, the Schedule B code is 8482997090

Does NSN 3110-01-210-4004 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-01-210-4004 contain precious materials?

Item does not contain precious metal.

Does NSN 3110-01-210-4004 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3110-01-210-4004 was assigned to the Federal Catalog?

It was assigned 40 年前, on Wed, Jun 12, 1985

3110-01-210-4004 | Aerospace-Bearing

概括

探索軸承的詳細摘要資訊： 3110-01-210-4004. 包括 NSN、分類組和識別碼，以支援採購、合規性和準確的零件追蹤。

聯邦供應分類: 3110 未安裝的減摩軸承
（NSN）國家庫存編號: 3110-01-210-4004
商品名稱代碼: 22293
聯邦物品識別指南: A093A0
分配日期: 06/12/1985

一種相對扁平的剛性部件，帶或不帶中心孔，用於將環形軸承或套筒軸承固定在合適的外殼中。必須附有用於安裝的鑽孔和/或螺紋孔。不含：端蓋、電動旋轉設備。

0.250 inches nominal aperture diameter, 0.258 inches nominal body thickness, 4 bolt circle hole quantity, 0.1265 inches nominal counterbore depth, 0.6245 inches minimum and 0.6250 inches maximum body diameter

數據表

以下是軸承的綜合技術規格： 3110-01-210-4004 . 尋找尺寸、材料、公差、性能特徵等。

孔徑: 0.250 inches nominal
體直徑: 0.6245 inches minimum and 0.6250 inches maximum
琴身厚度: 0.258 inches nominal
螺栓圈孔數量: 4
沉孔深度: 0.1265 inches nominal
沉孔直徑: 0.3750 inches minimum and 0.3754 inches maximum
橫斷面形狀樣式: counterbored w/ aperture
外徑: 0.970 inches minimum and 0.990 inches maximum
總厚度: 0.320 inches nominal
物料文件及分類: qq-a-225/6,t351 fed spec single material response overall
材料: aluminum alloy 2024 overall
較小厚度: 0.194 inches nominal
安裝螺栓圓直徑: 0.812 inches nominal
安裝孔排列方式: single bolt hole circle
安裝孔類型: round, threaded
公稱螺紋尺寸: 0.112 inches
特殊功能: 32.0 microin finish on id of cbore; 63.0 microin finish on od of raised surface
樣式指示器: round
表面處理文件及分類: mil-a-8625 mil spec single treatment response overall
表面處理: anodize overall
測試資料文檔: "81349-mil-i-6866 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."
每英吋螺紋數量: 40
螺紋系列代號: unjc

常見問題

快速找到有關軸承的常見問題的答案： 3110-01-210-4004. 探索技術規格、安裝技巧、維護指南、監管要求和故障排除建議。

What is the FSCG of the NSN 3110-01-210-4004?: The FSCG of the NSN 3110-01-210-4004 is 3110

Does the NSN 3110-01-210-4004 have a Schedule B code assigned?: Yes, the Schedule B code is 8482997090

Does NSN 3110-01-210-4004 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-01-210-4004 contain precious materials?: Item does not contain precious metal.

Does NSN 3110-01-210-4004 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.