What is the FSCG of the NSN 3110-01-211-4512?

The FSCG of the NSN 3110-01-211-4512 is 3110

Does the NSN 3110-01-211-4512 have a Schedule B code assigned?

Yes, the Schedule B code is 8482997090

Does NSN 3110-01-211-4512 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-01-211-4512 contain precious materials?

Item does not contain precious metal.

Does NSN 3110-01-211-4512 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3110-01-211-4512 was assigned to the Federal Catalog?

It was assigned 39 年前, on Wed, Jun 26, 1985

NF203276-1 | Aerospace-Bearing

概括

探索軸承的詳細摘要資訊： NF203276-1. 包括 NSN、分類組和識別碼，以支援採購、合規性和準確的零件追蹤。

零件編號: NF203276-1
聯邦供應分類: 3110 未安裝的減摩軸承
（NSN）國家庫存編號: 3110-01-211-4512
商品名稱代碼: 22293
聯邦物品識別指南: A093A0
分配日期: 06/26/1985

一種相對扁平的剛性部件，帶或不帶中心孔，用於將環形軸承或套筒軸承固定在合適的外殼中。必須附有用於安裝的鑽孔和/或螺紋孔。不含：端蓋、電動旋轉設備。

0.500 inches nominal counterbore diameter, raised surface w/o aperture cross-sectional shape style, 2 lug quantity, 0.121 inches nominal counterbore depth, 2 bolt circle hole quantity

數據表

以下是軸承的綜合技術規格： 3110-01-211-4512 . 尋找尺寸、材料、公差、性能特徵等。

螺栓圈孔數量: 2
沉孔深度: 0.121 inches nominal
沉孔直徑: 0.500 inches nominal
橫斷面形狀樣式: raised surface w/o aperture
接線片數量: 2
凸耳寬度: 0.500 inches nominal
外徑: 1.280 inches nominal
外凸面直徑: 0.622 inches minimum and 0.625 inches maximum
總厚度: 0.171 inches nominal
物料文件及分類: qq-a-225/6 fed spec single material response overall
材料: aluminum alloy 2024 overall
較小厚度: 0.050 inches nominal
安裝螺栓圓直徑: 1.706 inches nominal
安裝孔直徑: 0.218 inches minimum and 0.226 inches maximum
安裝孔類型: round, unthreaded
升高表面高度: 0.121 inches nominal
從板中心到凸耳末端的半徑: 1.103 inches nominal
特殊功能: od of raised surface to have 63.0 microin fin.; mounting hole tabs each equidistant 0.344 in. above horizontal centerline and 0.781 in. to either side of the vertical centerline
表面處理文件及分類: mil-a-8625 mil spec single treatment response overall
表面處理: anodize overall
測試資料文檔: "81349-mil-i-6866 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

常見問題

快速找到有關軸承的常見問題的答案： NF203276-1. 探索技術規格、安裝技巧、維護指南、監管要求和故障排除建議。

What is the FSCG of the NSN 3110-01-211-4512?: The FSCG of the NSN 3110-01-211-4512 is 3110

Does the NSN 3110-01-211-4512 have a Schedule B code assigned?: Yes, the Schedule B code is 8482997090

Does NSN 3110-01-211-4512 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-01-211-4512 contain precious materials?: Item does not contain precious metal.

Does NSN 3110-01-211-4512 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.