What is the FSCG of the NSN 3110-01-237-5328?

The FSCG of the NSN 3110-01-237-5328 is 3110

Does the NSN 3110-01-237-5328 have a Schedule B code assigned?

Yes, the Schedule B code is 8482997090

Does NSN 3110-01-237-5328 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-01-237-5328 contain precious materials?

Item does not contain precious metal.

Does NSN 3110-01-237-5328 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3110-01-237-5328 was assigned to the Federal Catalog?

It was assigned 38 年前, on Thu, Jul 31, 1986

3110-01-237-5328 | Aerospace-Bearing

概括

探索軸承的詳細摘要資訊： 3110-01-237-5328. 包括 NSN、分類組和識別碼，以支援採購、合規性和準確的零件追蹤。

聯邦供應分類: 3110 未安裝的減摩軸承
（NSN）國家庫存編號: 3110-01-237-5328
商品名稱代碼: 22293
聯邦物品識別指南: A093A0
分配日期: 07/31/1986

一種相對扁平的剛性部件，帶或不帶中心孔，用於將環形軸承或套筒軸承固定在合適的外殼中。必須附有用於安裝的鑽孔和/或螺紋孔。不含：端蓋、電動旋轉設備。

1.894 inches nominal aperture diameter, 2.0635 inches minimum and 2.0645 inches maximum counterbore diameter, 0.406 inches minimum and 0.410 inches maximum counterbore depth, 1.750 inches nominal distance from horizontal centerline to center of right hole, 1.750 inches nominal distance from vertical centerline to center of right hole

數據表

以下是軸承的綜合技術規格： 3110-01-237-5328 . 尋找尺寸、材料、公差、性能特徵等。

水平中心線至右孔中心的距離: 1.750 inches nominal
垂直中心線至右孔中心的距離: 1.750 inches nominal
孔徑: 1.894 inches nominal
沉孔直徑: 2.0635 inches minimum and 2.0645 inches maximum
沉孔深度: 0.406 inches minimum and 0.410 inches maximum
橫斷面形狀樣式: raised surface w/ aperture
孔距: 3.500 inches nominal
寬度方向孔距: 3.500 inches nominal
內凸面直徑: 2.0635 inches minimum and 2.0645 inches maximum
長度: 4.500 inches nominal
外凸面直徑: 0.407 inches nominal
總厚度: 1.745 inches minimum and 1.755 inches maximum
物料文件及分類: qq-a-250/11,t651 fed spec single material response overall
材料: aluminum alloy 6061 overall
較小厚度: 0.930 inches minimum and 0.940 inches maximum
安裝孔排列方式: four holes
安裝孔直徑: 0.179 inches minimum and 0.185 inches maximum
安裝孔類型: round, unthreaded
升高表面高度: 1.375 inches nominal
特殊功能: one 0.156 in. dia min to 0.160 in. dia max blind hole in outer face,0.190 in. dp,countersunk 0.187 in. diy by 100.0 deg,w/one ms16562 tubular pin spring inserted,located 0.812 in. below horiz cl and 1.312 in. left of vert cl
樣式指示器: square
表面處理文件及分類: 887193,fscm 49956 mfr ref single treatment response outer face as mounted
表面處理文件及分類: mil-c-5541,class 1a mil spec single treatment response bore
表面處理文件及分類: mil-c-5541,class 1a mil spec single treatment response inner face as mounted
表面處理文件及分類: mil-c-5541,class 1a mil spec single treatment response raised surface
表面處理: chromate bore
表面處理: chromate inner face as mounted
表面處理: chromate raised surface
表面處理: enamel outer face as mounted

常見問題

快速找到有關軸承的常見問題的答案： 3110-01-237-5328. 探索技術規格、安裝技巧、維護指南、監管要求和故障排除建議。

What is the FSCG of the NSN 3110-01-237-5328?: The FSCG of the NSN 3110-01-237-5328 is 3110

Does the NSN 3110-01-237-5328 have a Schedule B code assigned?: Yes, the Schedule B code is 8482997090

Does NSN 3110-01-237-5328 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-01-237-5328 contain precious materials?: Item does not contain precious metal.

Does NSN 3110-01-237-5328 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.