What is the FSCG of the NSN 3110-01-362-9812?

The FSCG of the NSN 3110-01-362-9812 is 3110

Does the NSN 3110-01-362-9812 have a Schedule B code assigned?

Yes, the Schedule B code is 8482500000

Does NSN 3110-01-362-9812 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-01-362-9812 contain precious materials?

Item does not contain precious metal.

Does NSN 3110-01-362-9812 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3110-01-362-9812 was assigned to the Federal Catalog?

It was assigned 32 年前, on Wed, Aug 19, 1992

MS21221-4K | Aerospace-Bearing

概括

探索軸承的詳細摘要資訊： MS21221-4K. 包括 NSN、分類組和識別碼，以支援採購、合規性和準確的零件追蹤。

零件編號: MS21221-4K
聯邦供應分類: 3110 未安裝的減摩軸承
（NSN）國家庫存編號: 3110-01-362-9812
商品名稱代碼: 00050
聯邦物品識別指南: A044A0
分配日期: 08/19/1992

一種特殊的單列或多列滾子軸承，剛性或自調心，並採用內螺紋、空心、梅花螺紋或實心軸構造。

0.2495 inches minimum and 0.2500 inches maximum bore diameter, 1.8300 inches minimum and 1.8500 inches maximum length from bore center to shank end, 0.4950 inches minimum and 0.5000 inches maximum inner ring width, self-aligning alignment type, contact bearing seal type

數據表

以下是軸承的綜合技術規格： 3110-01-362-9812 . 尋找尺寸、材料、公差、性能特徵等。

對齊類型: self-aligning
軸承密封型: contact
孔徑: 0.2495 inches minimum and 0.2500 inches maximum
內圈寬度: 0.4950 inches minimum and 0.5000 inches maximum
從孔中心到柄端的長度: 1.8300 inches minimum and 1.8500 inches maximum
潤滑材料文獻及分類: mil-g-81322 mil spec single material response
潤滑材料: grease
外圈寬度: 0.3750 inches maximum
總長度: 2.3700 inches minimum and 2.3900 inches maximum
材料: plastic polytetrafluoroethylene seal
材料: steel comp 4620 or steel comp 4130 or steel comp 8620 or steel comp e52100 supporting sleeve
材料: steel comp e52100 inner ring
材料: steel comp e52100 roller
公稱螺紋尺寸: 0.375 inches
封條數量: 2
自對準角: 10.00 degrees nominal
自對準定位: internal
柄直徑: 0.3750 inches maximum
柄型: externally threaded
柄螺紋長度: 0.9800 inches minimum and 1.0020 inches maximum
特殊功能: internal clearance 0.0002 in. min 0.0010 in. max; keyway in shank
表面處理: cadmium exposed surfaces as mounted
Thread 類: 3a
線程方向: right-hand
每英吋螺紋數量: 24
螺紋系列代號: unjf

常見問題

快速找到有關軸承的常見問題的答案： MS21221-4K. 探索技術規格、安裝技巧、維護指南、監管要求和故障排除建議。

What is the FSCG of the NSN 3110-01-362-9812?: The FSCG of the NSN 3110-01-362-9812 is 3110

Does the NSN 3110-01-362-9812 have a Schedule B code assigned?: Yes, the Schedule B code is 8482500000

Does NSN 3110-01-362-9812 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-01-362-9812 contain precious materials?: Item does not contain precious metal.

Does NSN 3110-01-362-9812 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.