What is the FSCG of the NSN 3120-00-004-8896?

The FSCG of the NSN 3120-00-004-8896 is 3120

Does the NSN 3120-00-004-8896 have a Schedule B code assigned?

Yes, the Schedule B code is 8482997060

Does NSN 3120-00-004-8896 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3120-00-004-8896 contain precious materials?

Item does not contain precious metal.

Does NSN 3120-00-004-8896 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3120-00-004-8896 was assigned to the Federal Catalog?

It was assigned 53 年前, on Wed, Jun 14, 1972

L44000-11-6 | Aerospace-Bearing

概括

探索軸承的詳細摘要資訊： L44000-11-6. 包括 NSN、分類組和識別碼，以支援採購、合規性和準確的零件追蹤。

零件編號: L44000-11-6
聯邦供應分類: 3120 未安裝的滑動軸承
（NSN）國家庫存編號: 3120-00-004-8896
商品名稱代碼: 13206
聯邦物品識別指南: A045A0
分配日期: 06/14/1972

一種管狀無螺紋物件，一端帶或不帶凸緣，設計用於插入孔中以減小孔的內徑，並保護周圍的主體結構免受應力、應變和/或振動造成的損壞。總長度必須超過外徑的25%，或主體週邊平面之間的最短距離。包括分成兩段或多段的物件，且軸承週邊的旋轉角度不超過180度（3.141弧度）。有關橡膠製品，請參閱非金屬襯套。另請參閱軸承，套筒；錐形襯套；墊片，套筒；絕緣體，襯套；以及電導體襯套。不包括：襯套，鑽頭，夾具。

round left flange body corner corner shape, 0.6150 inches minimum and 0.6350 inches maximum body inside diameter, 0.8740 inches minimum and 0.8745 inches maximum body outside diameter, square outside left corner corner shape, square left flange outside right corner corner shape

數據表

以下是軸承的綜合技術規格： 3120-00-004-8896 . 尋找尺寸、材料、公差、性能特徵等。

閥體內徑: 0.6150 inches minimum and 0.6350 inches maximum
閥體外徑: 0.8740 inches minimum and 0.8745 inches maximum
角形狀: round left flange body corner
角形狀: square left flange outside right corner
角形狀: square outside left corner
角形狀: square inside left corner
角形狀: square inside right corner
角形狀: square outside right corner
法蘭外徑: 1.4280 inches minimum and 1.4480 inches maximum
法蘭寬度: 0.1150 inches minimum and 0.1350 inches maximum
內法蘭孔直徑: 0.1810 inches minimum and 0.2010 inches maximum
內法蘭左端至中心線距離: 0.5085 inches minimum and 0.5585 inches maximum
內緣寬度: 0.4130 inches minimum and 0.4730 inches maximum
總長度: 1.3050 inches minimum and 1.3250 inches maximum
物料文件及分類: qq-s-76317-4p fed spec single material response overall
材料: steel overall
特殊功能: one side of flange flat 0.575 in. to 0.627 in. from centerline of bore to flat edge
樣式指示器: solid, external flange one end, interior flange(s) not located at either end
表面處理: 63.0 microinches outside diameter surface of body
表面處理文件及分類: mil-s-5002 mil spec single treatment response overall
表面處理: passivate overall
測試資料文檔: "81349-mil-i-6866 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

常見問題

快速找到有關軸承的常見問題的答案： L44000-11-6. 探索技術規格、安裝技巧、維護指南、監管要求和故障排除建議。

What is the FSCG of the NSN 3120-00-004-8896?: The FSCG of the NSN 3120-00-004-8896 is 3120

Does the NSN 3120-00-004-8896 have a Schedule B code assigned?: Yes, the Schedule B code is 8482997060

Does NSN 3120-00-004-8896 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3120-00-004-8896 contain precious materials?: Item does not contain precious metal.

Does NSN 3120-00-004-8896 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.