What is the FSCG of the NSN 3120-00-661-5624?

The FSCG of the NSN 3120-00-661-5624 is 3120

Does the NSN 3120-00-661-5624 have a Schedule B code assigned?

Yes, the Schedule B code is 8482105008

Does NSN 3120-00-661-5624 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3120-00-661-5624 contain precious materials?

Item does not contain precious metal.

Does NSN 3120-00-661-5624 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3120-00-661-5624 was assigned to the Federal Catalog?

It was assigned 62 年前, on Tue, Jan 1, 1963

08-500-121-00-032 | Aerospace-Bearing

概括

探索軸承的詳細摘要資訊： 08-500-121-00-032. 包括 NSN、分類組和識別碼，以支援採購、合規性和準確的零件追蹤。

零件編號: 08-500-121-00-032
聯邦供應分類: 3120 未安裝的滑動軸承
（NSN）國家庫存編號: 3120-00-661-5624
商品名稱代碼: 13211
聯邦物品識別指南: A045A0
分配日期: 01/01/1963

任何週邊形狀的物件，通常具有一個平面或球面以及一個位於中心的孔。其設計用於涉及移動（動能）載荷的應用。除由軸承級合成材料（塑膠）或多層材料製成的物件外，其中一個軸承面必須具有特定的表面光潔度等級，即32微英吋（0.8微米）或更小、算術平均值（aa）（算術平均偏差）或以下條件之一：經研磨或研磨；具有可見或可檢測的潤滑方式；凹槽、壓痕平均偏差）或自潤滑。厚度不得超過週邊平面之間最短距離外徑的25%（當厚度和/或外徑被指定為公差尺寸時，將使用最大尺寸來確定是否符合要求）。不包括：僅具有與孔軸線平行的軸承面的直管狀（無凸緣）物件。另請參閱墊圈、平面和墊片、套筒。

square first inside corner corner shape, round center hole shape style, square first outside corner corner shape, square second inside corner corner shape, square fourth outside corner corner shape

數據表

以下是軸承的綜合技術規格： 3120-00-661-5624 . 尋找尺寸、材料、公差、性能特徵等。

中心孔形狀樣式: round
角形狀: square first inside corner
角形狀: square first outside corner
角形狀: square fourth outside corner
角形狀: square second inside corner
角形狀: square second outside corner
角形狀: square third outside corner
橫斷面形狀樣式: shouldered
直徑: 2.5250 inches minimum and 2.5300 inches maximum
法蘭厚度: 0.2400 inches minimum and 0.2450 inches maximum
外徑: 3.7080 inches minimum and 3.7180 inches maximum
總厚度: 0.7500 inches nominal
物料文件及分類: qq-c-390 fed spec single material response overall
材料: copper alloy 934 overall
柄部外徑: 3.4970 inches minimum and 3.4980 inches maximum
特殊功能: groove under flange 0.0625 in. wide,0.0610 in. deep
樣式指示器: round
表面狀況: ground

常見問題

快速找到有關軸承的常見問題的答案： 08-500-121-00-032. 探索技術規格、安裝技巧、維護指南、監管要求和故障排除建議。

What is the FSCG of the NSN 3120-00-661-5624?: The FSCG of the NSN 3120-00-661-5624 is 3120

Does the NSN 3120-00-661-5624 have a Schedule B code assigned?: Yes, the Schedule B code is 8482105008

Does NSN 3120-00-661-5624 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3120-00-661-5624 contain precious materials?: Item does not contain precious metal.

Does NSN 3120-00-661-5624 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.