What is the FSCG of the NSN 3120-00-740-6473?

The FSCG of the NSN 3120-00-740-6473 is 3120

Does the NSN 3120-00-740-6473 have a Schedule B code assigned?

Yes, the Schedule B code is 8482105008

Does NSN 3120-00-740-6473 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3120-00-740-6473 contain precious materials?

Precious metal content is unknown

Does NSN 3120-00-740-6473 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3120-00-740-6473 was assigned to the Federal Catalog?

It was assigned 62 年前, on Tue, Jan 1, 1963

1560HC1-022 | Aerospace-Bearing

概括

探索軸承的詳細摘要資訊： 1560HC1-022. 包括 NSN、分類組和識別碼，以支援採購、合規性和準確的零件追蹤。

零件編號: 1560HC1-022
聯邦供應分類: 3120 未安裝的滑動軸承
（NSN）國家庫存編號: 3120-00-740-6473
商品名稱代碼: 13211
聯邦物品識別指南: A045A0
分配日期: 01/01/1963

任何週邊形狀的物件，通常具有一個平面或球面以及一個位於中心的孔。其設計用於涉及移動（動能）載荷的應用。除由軸承級合成材料（塑膠）或多層材料製成的物件外，其中一個軸承面必須具有特定的表面光潔度等級，即32微英吋（0.8微米）或更小、算術平均值（aa）（算術平均偏差）或以下條件之一：經研磨或研磨；具有可見或可檢測的潤滑方式；凹槽、壓痕平均偏差）或自潤滑。厚度不得超過週邊平面之間最短距離外徑的25%（當厚度和/或外徑被指定為公差尺寸時，將使用最大尺寸來確定是否符合要求）。不包括：僅具有與孔軸線平行的軸承面的直管狀（無凸緣）物件。另請參閱墊圈、平面和墊片、套筒。

round w/round keyways center hole shape style, square first inside corner corner shape, 0.2300 inches minimum and 0.2700 inches maximum center hole keyway radius, 8 center hole keyway quantity, round second inside corner corner shape

數據表

以下是軸承的綜合技術規格： 3120-00-740-6473 . 尋找尺寸、材料、公差、性能特徵等。

中心孔鍵槽半徑: 0.2300 inches minimum and 0.2700 inches maximum
中心孔鍵槽數量: 8
中心孔形狀樣式: round w/round keyways
角形狀: round second inside corner
角形狀: square first inside corner
角形狀: square first outside corner
角形狀: square fourth inside corner
角形狀: square second outside corner
角形狀: square third inside corner
沉孔深度: 0.0550 inches minimum and 0.0650 inches maximum
沉孔直徑: 4.3900 inches minimum and 4.4100 inches maximum
橫斷面形狀樣式: counterbored
潤滑特性: perforation external surface member
大直徑: 4.3900 inches minimum and 4.4100 inches maximum
外徑: 4.7600 inches minimum and 4.7800 inches maximum
總厚度: 0.1770 inches minimum and 0.1800 inches maximum
物料文件及分類: qq-p-330 fed spec single material response overall
材料: copper alloy overall
小直徑: 4.0070 inches minimum and 4.0090 inches maximum
特殊功能: identical counter bore on opposite bearing surface
樣式指示器: round
表面處理: 125.0 microinches counterbore diameter
表面處理: 125.0 microinches largest outside diameter
表面處理: 125.0 microinches left side
表面處理: 125.0 microinches right side
表面處理: 63.0 microinches inside diameter surface of body

常見問題

快速找到有關軸承的常見問題的答案： 1560HC1-022. 探索技術規格、安裝技巧、維護指南、監管要求和故障排除建議。

What is the FSCG of the NSN 3120-00-740-6473?: The FSCG of the NSN 3120-00-740-6473 is 3120

Does the NSN 3120-00-740-6473 have a Schedule B code assigned?: Yes, the Schedule B code is 8482105008

Does NSN 3120-00-740-6473 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3120-00-740-6473 contain precious materials?: Precious metal content is unknown

Does NSN 3120-00-740-6473 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.