What is the FSCG of the NSN 3120-00-897-8292?

The FSCG of the NSN 3120-00-897-8292 is 3120

Does the NSN 3120-00-897-8292 have a Schedule B code assigned?

Yes, the Schedule B code is 8482997090

Does NSN 3120-00-897-8292 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3120-00-897-8292 contain precious materials?

Precious metal content is unknown

Does NSN 3120-00-897-8292 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3120-00-897-8292 was assigned to the Federal Catalog?

It was assigned 63 年前, on Mon, Jan 1, 1962

172629 | Aerospace-Bearing

概括

探索軸承的詳細摘要資訊： 172629. 包括 NSN、分類組和識別碼，以支援採購、合規性和準確的零件追蹤。

零件編號: 172629
聯邦供應分類: 3120 未安裝的滑動軸承
（NSN）國家庫存編號: 3120-00-897-8292
商品名稱代碼: 13205
聯邦物品識別指南: A045A0
分配日期: 01/01/1962

管狀物件，帶或不帶凸緣，旨在減少摩擦，並在平行於孔軸線的表面上承載動載荷。必須具有可見或可檢測的潤滑裝置，或可自潤滑。總長度必須超過外徑的25%或本體週邊平面之間的最短距離，但直管狀（無凸緣或肩部）物體除外，其承載面僅平行於孔軸線。包括分成兩段或多段，且承載圓週角不超過180度（3.141弧度）的物件。另請參閱襯套、套筒；墊片、套筒；以及墊圈（經修改）。不含：銷、空心。

0.9980 inches minimum and 0.9985 inches maximum body outside diameter, chamfered outside left corner corner shape, 0.6700 inches minimum and 0.6900 inches maximum body inside diameter, chamfered outside right corner corner shape, 2 hole antirotation/lubrication type and quantity

數據表

以下是軸承的綜合技術規格： 3120-00-897-8292 . 尋找尺寸、材料、公差、性能特徵等。

防旋轉/潤滑類型和數量: 2 hole
閥體內徑: 0.6700 inches minimum and 0.6900 inches maximum
閥體外徑: 0.9980 inches minimum and 0.9985 inches maximum
角形狀: chamfered outside right corner
角形狀: chamfered outside left corner
角形狀: square inside left corner
角形狀: square inside right corner
孔徑: 0.2510 inches minimum and 0.2570 inches maximum first
總長度: 5.4300 inches minimum and 5.4500 inches maximum
物料文件及分類: ams6415 assn std single material response overall
材料: steel comp 4340 overall
樣式指示器: solid, plain, no outside flanges
表面處理: 125.0 microinches inside diameter surface of body
表面處理: 125.0 microinches left end surface of body
表面處理: 125.0 microinches right end surface of body
表面處理: 32.0 microinches outside diameter surface of body
表面處理: cadmium inside diameter surface of body
表面處理: cadmium left end surface of body
表面處理: cadmium right end surface of body
表面處理: chromium outside diameter surface of body
測試資料文檔: "81349-mil-i-6870 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

常見問題

快速找到有關軸承的常見問題的答案： 172629. 探索技術規格、安裝技巧、維護指南、監管要求和故障排除建議。

What is the FSCG of the NSN 3120-00-897-8292?: The FSCG of the NSN 3120-00-897-8292 is 3120

Does the NSN 3120-00-897-8292 have a Schedule B code assigned?: Yes, the Schedule B code is 8482997090

Does NSN 3120-00-897-8292 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3120-00-897-8292 contain precious materials?: Precious metal content is unknown

Does NSN 3120-00-897-8292 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.