ATNE8-302WDHS Rod End Plain Bearing
综合规格和应用细节: ATNE8-302WDHS Rod End Plain Bearing.
概括
探索軸承的詳細摘要資訊： ATNE8-302WDHS. 包括 NSN、分類組和識別碼，以支援採購、合規性和準確的零件追蹤。
- 零件編號
- ATNE8-302WDHS
- 聯邦供應分類
- 3120 未安裝的滑動軸承
- （NSN）國家庫存編號
- 3120-01-030-3383
- 商品名稱代碼
- 13209
- 聯邦物品識別指南
- A045A0
- 分配日期
- 11/03/1976
一種可拆卸組件，軸頸、軸頸、樞軸或類似物可在其內或上移動。它用於承載載荷並減少滑動摩擦。它不使用滾動元件。此組件的外部構件經過改造，以提供軸桿。內部構件可以是滑動球面軸承或套筒軸承。不含：滑動球面軸承和自調心滑動軸承。
204-076-428-3,97499 mfr ref single material response race liner material document and classification, 3.3020 inches minimum and 3.3220 inches maximum bore center to shank end distance, 0.4995 inches minimum and 0.5000 inches maximum bore diameter, 0.9350 inches minimum and 0.9370 inches maximum inner member width, 35.5 rockwell c minimum and 41.5 rockwell c maximum internal rod end body hardness rating
數據表
以下是軸承的綜合技術規格： 3120-01-030-3383 . 尋找尺寸、材料、公差、性能特徵等。
- 孔徑
- 0.4995 inches minimum and 0.5000 inches maximum
- 孔中心至柄端距離
- 3.3020 inches minimum and 3.3220 inches maximum
- 硬度等級
- 35.5 rockwell c minimum and 41.5 rockwell c maximum internal rod end body
- 內構件寬度
- 0.9350 inches minimum and 0.9370 inches maximum
- 物料文件及分類
- 204-076-428-3,97499 mfr ref single material response race liner
- 總長度
- 4.1970 inches minimum and 4.2270 inches maximum
- 物料文件及分類
- ams5643 assn std single material response internal rod end body
- 物料文件及分類
- ams5614 assn std single material response race insert
- 物料文件及分類
- qq-s-763 fed spec single material response inner member
- 材料
- plastic tetrafluoroethylene race liner
- 材料
- steel comp 440c inner member
- 材料
- steel comp 410 race insert
- 材料
- steel internal rod end body
- 外部構件外徑
- 1.7900 inches minimum and 1.8100 inches maximum
- 外部構件寬度
- 0.6250 inches minimum and 0.6350 inches maximum
- 柄螺紋長度
- 1.9900 inches minimum and 2.0300 inches maximum
- 柄型
- externally threaded
- 特殊功能
- serial no. vibro etched on od of outer member,keyway in shank 0.125 in.min,0.130 in. max w,0.0845 in. min,0.0895 in. max dp
- 樣式指示器
- ball type
- 測試資料文檔
- "81349-mil-i-6866 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."
- Thread 類
- 3a
- 螺紋直徑
- 0.562 inches nominal
- 線程方向
- right-hand
- 每英吋螺紋數量
- 18
- 螺紋系列代號
- unf
常見問題
快速找到有關軸承的常見問題的答案： ATNE8-302WDHS. 探索技術規格、安裝技巧、維護指南、監管要求和故障排除建議。
- What is the FSCG of the NSN 3120-01-030-3383?
- The FSCG of the NSN 3120-01-030-3383 is 3120
- Does the NSN 3120-01-030-3383 have a Schedule B code assigned?
- Yes, the Schedule B code is 8483308055
- Does NSN 3120-01-030-3383 require demilitarization?
- Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
- Does NSN 3120-01-030-3383 contain precious materials?
- Precious metal content is unknown
- Does NSN 3120-01-030-3383 contain hazardous materials?
- Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
- When the NSN 3120-01-030-3383 was assigned to the Federal Catalog?
- It was assigned 49 年前, on Wed, Nov 3, 1976