What is the FSCG of the NSN 3120-01-131-2995?

The FSCG of the NSN 3120-01-131-2995 is 3120

Does the NSN 3120-01-131-2995 have a Schedule B code assigned?

Yes, the Schedule B code is 8482997090

Does NSN 3120-01-131-2995 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3120-01-131-2995 contain precious materials?

Item does not contain precious metal.

Does NSN 3120-01-131-2995 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3120-01-131-2995 was assigned to the Federal Catalog?

It was assigned 43 年前, on Fri, May 7, 1982

MS21241-05A012 | Aerospace-Bearing

概括

探索軸承的詳細摘要資訊： MS21241-05A012. 包括 NSN、分類組和識別碼，以支援採購、合規性和準確的零件追蹤。

零件編號: MS21241-05A012
聯邦供應分類: 3120 未安裝的滑動軸承
（NSN）國家庫存編號: 3120-01-131-2995
商品名稱代碼: 13205
聯邦物品識別指南: A045A0
分配日期: 05/07/1982

管狀物件，帶或不帶凸緣，旨在減少摩擦，並在平行於孔軸線的表面上承載動載荷。必須具有可見或可檢測的潤滑裝置，或可自潤滑。總長度必須超過外徑的25%或本體週邊平面之間的最短距離，但直管狀（無凸緣或肩部）物體除外，其承載面僅平行於孔軸線。包括分成兩段或多段，且承載圓週角不超過180度（3.141弧度）的物件。另請參閱襯套、套筒；墊片、套筒；以及墊圈（經修改）。不含：銷、空心。

0.4381 inches minimum and 0.4391 inches maximum body outside diameter, square inside left corner corner shape, 0.3130 inches minimum and 0.3140 inches maximum body inside diameter, square left flange outside right corner corner shape, square outside left corner corner shape

數據表

以下是軸承的綜合技術規格： 3120-01-131-2995 . 尋找尺寸、材料、公差、性能特徵等。

閥體內徑: 0.3130 inches minimum and 0.3140 inches maximum
閥體外徑: 0.4381 inches minimum and 0.4391 inches maximum
角形狀: square left flange outside right corner
角形狀: square outside left corner
角形狀: square inside left corner
角形狀: square inside right corner
角形狀: square outside right corner
角形狀: undercut left flange body corner
法蘭外徑: 0.7920 inches minimum and 0.8120 inches maximum
法蘭寬度: 0.0575 inches minimum and 0.0625 inches maximum
總長度: 0.4225 inches minimum and 0.4375 inches maximum
物料文件及分類: qq-a-200/3,t851 fed spec single material response or qq-a-225/6,t8511 fed spec single material response outer layer
材料: aluminum alloy 2024 outer layer
材料: plastic polytetrafluoroethylene inner layer
特殊功能: plastic liner bonded to left end surface of flange
樣式指示器: solid, external flange one end
表面處理: 63.0 microinches outside diameter surface of body
表面處理文件及分類: mil-a-8625,type 1 mil spec 1st treatment response or mil-a-8625,type 2 mil spec 1st treatment response or mil-c-5541 mil spec 2nd treatment response outer layer
表面處理: anodize or chromate outer layer

替換

The NSN 3120-01-131-2995 is used in place of the following discontinued or alternate items:

NSN	姓名	日期
3120-00-500-2363	No Name Available	01/01/1985

常見問題

快速找到有關軸承的常見問題的答案： MS21241-05A012. 探索技術規格、安裝技巧、維護指南、監管要求和故障排除建議。

What is the FSCG of the NSN 3120-01-131-2995?: The FSCG of the NSN 3120-01-131-2995 is 3120

Does the NSN 3120-01-131-2995 have a Schedule B code assigned?: Yes, the Schedule B code is 8482997090

Does NSN 3120-01-131-2995 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3120-01-131-2995 contain precious materials?: Item does not contain precious metal.

Does NSN 3120-01-131-2995 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.