3120-01-198-6519 Rod End Plain Bearing
NSN 的全面規格和應用詳情： 3120-01-198-6519.
概括
探索軸承的詳細摘要資訊： 3120-01-198-6519. 包括 NSN、分類組和識別碼，以支援採購、合規性和準確的零件追蹤。
- 聯邦供應分類
- 3120 未安裝的滑動軸承
- （NSN）國家庫存編號
- 3120-01-198-6519
- 商品名稱代碼
- 13209
- 聯邦物品識別指南
- A045A0
- 分配日期
- 01/11/1985
一種可拆卸組件，軸頸、軸頸、樞軸或類似物可在其內或上移動。它用於承載載荷並減少滑動摩擦。它不使用滾動元件。此組件的外部構件經過改造，以提供軸桿。內部構件可以是滑動球面軸承或套筒軸承。不含：滑動球面軸承和自調心滑動軸承。
55.0 rockwell c minimum and 62.0 rockwell c maximum inner member hardness rating, 0.3745 inches minimum and 0.3750 inches maximum bore diameter, 39.0 rockwell c minimum and 42.0 rockwell c maximum rod end body hardness rating, 1.9280 inches minimum and 1.9480 inches maximum bore center to shank end distance, 23.0 rockwell c minimum and 35.0 rockwell c maximum race insert hardness rating
數據表
以下是軸承的綜合技術規格： 3120-01-198-6519 . 尋找尺寸、材料、公差、性能特徵等。
- 孔徑
- 0.3745 inches minimum and 0.3750 inches maximum
- 孔中心至柄端距離
- 1.9280 inches minimum and 1.9480 inches maximum
- 硬度等級
- 39.0 rockwell c minimum and 42.0 rockwell c maximum rod end body
- 硬度等級
- 55.0 rockwell c minimum and 62.0 rockwell c maximum inner member
- 硬度等級
- 23.0 rockwell c minimum and 35.0 rockwell c maximum race insert
- 內構件寬度
- 0.5000 inches nominal
- 總長度
- 2.4505 inches nominal
- 物料文件及分類
- ams 5630 assn std single material response inner member
- 物料文件及分類
- ams 5643 assn std 1st material response or ams 5659 assn std 2nd material response race insert
- 物料文件及分類
- mil-s-5000 mil spec single material response rod end body
- 材料
- plastic tetrafluoroethylene race liner
- 材料
- steel comp 4340 rod end body
- 材料
- steel comp 440c inner member
- 材料
- steel comp 630 or steel comp xm-12 race insert
- 外部構件外徑
- 1.0150 inches minimum and 1.0350 inches maximum
- 外部構件寬度
- 0.4110 inches minimum and 0.4210 inches maximum
- 柄型
- externally threaded
- 柄螺紋長度
- 1.1560 inches minimum and 1.2180 inches maximum
- 規格/標準數據
- 43999-ld131-0023 manufacturers standard
- 靜態徑向額定載重
- 8550 pounds
- 特殊功能
- seal,elastomeric,retained by metal ring or integral part of outer race on each side of bearing; 5.0 deg misalignment each side
- 樣式指示器
- ball type
- 表面處理文件及分類
- qq-p-416,type 1,class 2 fed spec single treatment response rod end body
- 表面處理
- cadmium rod end body
- 測試資料文檔
- "81349-mil-i-6868 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."
- Thread 類
- 3a
- 螺紋直徑
- 0.3750 inches nominal
- 線程方向
- right-hand
- 每英吋螺紋數量
- 24
- 螺紋系列代號
- unjf
相关轴承
探索与此 NSN 相关的各种轴承模型。点击下面的任何轴承，查看详细的技术数据、性能等级和应用指南。
| 零件編號 | 姓名 |
|---|---|
| LD131-0023-2006 | Rod End Plain Bearing |
常見問題
快速找到有關軸承的常見問題的答案： 3120-01-198-6519. 探索技術規格、安裝技巧、維護指南、監管要求和故障排除建議。
- What is the FSCG of the NSN 3120-01-198-6519?
- The FSCG of the NSN 3120-01-198-6519 is 3120
- Does the NSN 3120-01-198-6519 have a Schedule B code assigned?
- Yes, the Schedule B code is 8483308055
- Does NSN 3120-01-198-6519 require demilitarization?
- Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
- Does NSN 3120-01-198-6519 contain precious materials?
- Item does not contain precious metal.
- Does NSN 3120-01-198-6519 contain hazardous materials?
- Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
- When the NSN 3120-01-198-6519 was assigned to the Federal Catalog?
- It was assigned 41 年前, on Fri, Jan 11, 1985