458-52260-505 Plain Bearing Unit

المواصفات الشاملة وتفاصيل التطبيقات المتعلقة بما يلي: 458-52260-505 Plain Bearing Unit.

ملخص

استكشف معلومات موجزة مفصلة عن المحمل: 458-52260-505. يتضمن NSN ومجموعة التصنيف وأكواد التعريف لدعم المصادر والامتثال وتتبع الأجزاء بدقة.

رقم القطعة: 458-52260-505
تصنيف الإمدادات الفيدرالية: 3130 المحامل المركبة
(NSN) رقم المخزون الوطني: 3130-01-192-2304
اسم العنصر الكود: 30557
دليل تحديد العناصر الفيدرالية: A093A0
تاريخ التعيين: 10/18/1984

وحدة مجمعة مكونة من غلاف يشتمل على محمل عادي أو محامل، مصممة لتلبية ظروف مختلفة أو محددة للتركيب.

rigid alignment type, radial load capability type, kc135-r acft end item identification, steel overall material, housing has an outside diameter of 0.940 in. nom,bore w/o bearing is 0.640 in. nom,width is 1.055 in. nom;there are two flanges;one is 1.490 in. nom o/a wide,flatted at the top to 0.920 in. nom and at the bottom to 0.380;outer edge is 1.690 in. nom,inside edge is 0.800 in. nom w/radius of 0.470 in. nom where flange is welded to housing there are two holes drilled 0.250 in. min 0.254 in. max dia w/centers at 0.500 and 1.000 in. from top;second flange is 2.500 in. long,1.000 in. wide rounded at end,top flatted to 2.220 in. bottom flatted to 2.130 in. w/0.470 in,radius for welding to housing;there are three spot welds located 0.750 in. apart w/first located 0.980 in. from edge of housing;angle,center to center of two flanges is 86.5 deg min 87.5 deg max;bushing bacb28x9n125 is press fit into housing special features

ورقة البيانات

فيما يلي المواصفات الفنية الشاملة للمحمل: 3130-01-192-2304 . ابحث عن الأبعاد والمواد والتسامحات وخصائص الأداء وما إلى ذلك.

تحديد العنصر النهائي: kc135-r acft
نوع المحاذاة: rigid
نوع قدرة التحميل: radial
مادة: steel overall
الميزات الخاصة: housing has an outside diameter of 0.940 in. nom,bore w/o bearing is 0.640 in. nom,width is 1.055 in. nom;there are two flanges;one is 1.490 in. nom o/a wide,flatted at the top to 0.920 in. nom and at the bottom to 0.380;outer edge is 1.690 in. nom,inside edge is 0.800 in. nom w/radius of 0.470 in. nom where flange is welded to housing there are two holes drilled 0.250 in. min 0.254 in. max dia w/centers at 0.500 and 1.000 in. from top;second flange is 2.500 in. long,1.000 in. wide rounded at end,top flatted to 2.220 in. bottom flatted to 2.130 in. w/0.470 in,radius for welding to housing;there are three spot welds located 0.750 in. apart w/first located 0.980 in. from edge of housing;angle,center to center of two flanges is 86.5 deg min 87.5 deg max;bushing bacb28x9n125 is press fit into housing

الأسئلة الشائعة

ابحث عن إجابات سريعة للأسئلة الشائعة حول المحمل: 458-52260-505. استكشف المواصفات الفنية ونصائح التثبيت وإرشادات الصيانة والمتطلبات التنظيمية ونصائح استكشاف الأخطاء وإصلاحها.

What is the FSCG of the NSN 3130-01-192-2304?: The FSCG of the NSN 3130-01-192-2304 is 3130

Does the NSN 3130-01-192-2304 have a Schedule B code assigned?: Yes, the Schedule B code is 8482997090

Does NSN 3130-01-192-2304 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3130-01-192-2304 contain precious materials?: Item does not contain precious metal.

Does NSN 3130-01-192-2304 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.