458-52260-505 Plain Bearing Unit
포괄적인 명세 및 신청 세부사항: 458-52260-505 Plain Bearing Unit.
요약
베어링에 대한 자세한 요약 정보를 살펴보세요. 458-52260-505. 소싱, 규정 준수 및 정확한 부품 추적을 지원하기 위해 NSN, 분류 그룹 및 식별 코드가 포함되어 있습니다.
- 부품 번호
- 458-52260-505
- 연방 공급 분류
- 3130 장착 베어링
- (NSN) 국가 재고 번호
- 3130-01-192-2304
- 품목 이름 코드
- 30557
- 연방 품목 식별 가이드
- A093A0
- 배정 날짜
- 10/18/1984
다양한 또는 특정한 장착 조건을 충족하도록 설계된 플레인 베어링이나 베어링을 통합한 하우징으로 구성된 조립된 장치입니다.
rigid alignment type, housing has an outside diameter of 0.940 in. nom,bore w/o bearing is 0.640 in. nom,width is 1.055 in. nom;there are two flanges;one is 1.490 in. nom o/a wide,flatted at the top to 0.920 in. nom and at the bottom to 0.380;outer edge is 1.690 in. nom,inside edge is 0.800 in. nom w/radius of 0.470 in. nom where flange is welded to housing there are two holes drilled 0.250 in. min 0.254 in. max dia w/centers at 0.500 and 1.000 in. from top;second flange is 2.500 in. long,1.000 in. wide rounded at end,top flatted to 2.220 in. bottom flatted to 2.130 in. w/0.470 in,radius for welding to housing;there are three spot welds located 0.750 in. apart w/first located 0.980 in. from edge of housing;angle,center to center of two flanges is 86.5 deg min 87.5 deg max;bushing bacb28x9n125 is press fit into housing special features, kc135-r acft end item identification, radial load capability type, steel overall material
데이터시트
베어링에 대한 포괄적인 기술 사양은 다음과 같습니다. 3130-01-192-2304 . 치수, 재료, 허용오차, 성능 특성 등을 찾아보세요.
- 최종 품목 식별
- kc135-r acft
- 정렬 유형
- rigid
- 부하 용량 유형
- radial
- 재료
- steel overall
- 특별 기능
- housing has an outside diameter of 0.940 in. nom,bore w/o bearing is 0.640 in. nom,width is 1.055 in. nom;there are two flanges;one is 1.490 in. nom o/a wide,flatted at the top to 0.920 in. nom and at the bottom to 0.380;outer edge is 1.690 in. nom,inside edge is 0.800 in. nom w/radius of 0.470 in. nom where flange is welded to housing there are two holes drilled 0.250 in. min 0.254 in. max dia w/centers at 0.500 and 1.000 in. from top;second flange is 2.500 in. long,1.000 in. wide rounded at end,top flatted to 2.220 in. bottom flatted to 2.130 in. w/0.470 in,radius for welding to housing;there are three spot welds located 0.750 in. apart w/first located 0.980 in. from edge of housing;angle,center to center of two flanges is 86.5 deg min 87.5 deg max;bushing bacb28x9n125 is press fit into housing
자주 묻는 질문
베어링에 대한 일반적인 질문에 대한 빠른 답변을 찾아보세요. 458-52260-505. 기술 사양, 설치 팁, 유지 관리 지침, 규정 요구 사항 및 문제 해결 조언을 살펴보세요.
- What is the FSCG of the NSN 3130-01-192-2304?
- The FSCG of the NSN 3130-01-192-2304 is 3130
- Does the NSN 3130-01-192-2304 have a Schedule B code assigned?
- Yes, the Schedule B code is 8482997090
- Does NSN 3130-01-192-2304 require demilitarization?
- Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
- Does NSN 3130-01-192-2304 contain precious materials?
- Item does not contain precious metal.
- Does NSN 3130-01-192-2304 contain hazardous materials?
- Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
- When the NSN 3130-01-192-2304 was assigned to the Federal Catalog?
- It was assigned 41년 전, on Thu, Oct 18, 1984