- قطر التجويف
- 0.9843 inches nominal
- شكل التجويف
- straight
- الميزات المقدمة
- aligning ring
- التخليص الداخلي
- 0.0040 inches minimum axial and 0.0060 inches maximum axial and 0.0003 inches minimum radial and 0.0009 inches maximum radial
- اتجاه التحميل
- radial
- وثيقة المواد والتصنيف
- -3905,91547 mfr ref single material response retainer
- القطر الخارجي الكلي
- 1.6535 inches nominal
- العرض الكلي
- 0.3543 inches nominal
- وثيقة المواد والتصنيف
- ams 6440/7440 81343 assn std single material response ball
- وثيقة المواد والتصنيف
- ams 6441 81343 assn std single material response inner ring
- وثيقة المواد والتصنيف
- ams 6441 81343 assn std single material response outer ring
- مادة
- copper retainer
- مادة
- steel ball
- مادة
- steel inner ring
- مادة
- steel outer ring
- طريقة تصنيع المثبت
- machined
- الميزات الخاصة
- faces of inner ring sq w/bore within 0.0004 in.,faces of outer ring sqw/od within 0.0004 in.,parallelism ofouter and inner ring sides 0.0004 in.,od concentric w/bore within 0.002 to 0.005 in.,heat stabilized for operation at m65 deg f to p350 deg f,bore surface 16 to 20 uin aa,od surface 15 to 16 uin aa,inner and outer ring raceway surfaces 6 to 8 uin aa,retainer pocket surface 30 to 63 uin aa,lips of inner ring surface 10 to 20 uin aa,ring and ball rockwell harden c58.0 to c62.0
- تعيين التسامح القياسي
- abec no.3
- مُحدد الأسلوب
- non-loading groove, non-separable
- تشطيب السطح
- ground
- وثيقة بيانات الاختبار
- "e1004-91547 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.). and +6903-91547 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."
