- 보어 직경
- 0.9843 inches nominal
- 보어 모양
- straight
- 제공되는 기능
- aligning ring
- 내부 여유 공간
- 0.0040 inches minimum axial and 0.0060 inches maximum axial and 0.0003 inches minimum radial and 0.0009 inches maximum radial
- 하중 방향
- radial
- 재료 문서 및 분류
- -3905,91547 mfr ref single material response retainer
- 전체 외경
- 1.6535 inches nominal
- 전체 너비
- 0.3543 inches nominal
- 재료 문서 및 분류
- ams 6440/7440 81343 assn std single material response ball
- 재료 문서 및 분류
- ams 6441 81343 assn std single material response inner ring
- 재료 문서 및 분류
- ams 6441 81343 assn std single material response outer ring
- 재료
- copper retainer
- 재료
- steel ball
- 재료
- steel inner ring
- 재료
- steel outer ring
- 리테이너 제작 방법
- machined
- 특별 기능
- faces of inner ring sq w/bore within 0.0004 in.,faces of outer ring sqw/od within 0.0004 in.,parallelism ofouter and inner ring sides 0.0004 in.,od concentric w/bore within 0.002 to 0.005 in.,heat stabilized for operation at m65 deg f to p350 deg f,bore surface 16 to 20 uin aa,od surface 15 to 16 uin aa,inner and outer ring raceway surfaces 6 to 8 uin aa,retainer pocket surface 30 to 63 uin aa,lips of inner ring surface 10 to 20 uin aa,ring and ball rockwell harden c58.0 to c62.0
- 표준 허용 오차 지정
- abec no.3
- 스타일 지정자
- non-loading groove, non-separable
- 표면 마감
- ground
- 테스트 데이터 문서
- "e1004-91547 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.). and +6903-91547 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."
