3110-00-232-7979 Duplex Ball Bearing
NSN에 대한 포괄적인 사양 및 애플리케이션 세부 정보: 3110-00-232-7979.
요약
베어링에 대한 자세한 요약 정보를 살펴보세요. 3110-00-232-7979. 소싱, 규정 준수 및 정확한 부품 추적을 지원하기 위해 NSN, 분류 그룹 및 식별 코드가 포함되어 있습니다.
- 연방 공급 분류
- 3110 비장착형 마찰 방지 베어링
- (NSN) 국가 재고 번호
- 3110-00-232-7979
- 품목 이름 코드
- 30213
- 연방 품목 식별 가이드
- A044A0
- 배정 날짜
- 10/24/1970
치수적으로 선택된 두 개의 단열 환형 볼 베어링이 한 쌍 또는 세트로 구성됩니다. 링 면은 특정 오프셋으로 특수 연삭되어 장착 시 미리 정해진 예압을 생성합니다. 이중 장착을 위해 특수 연삭된 면을 가진 단열 앵귤러 콘택트 베어링이 포함될 수 있습니다.
standard internal fit-up designation, contact bearing seal type, angular load direction, 3.9997 inches minimum and 4.0000 inches maximum bore diameter, 30.0 degrees nominal contact angle
데이터시트
베어링에 대한 포괄적인 기술 사양은 다음과 같습니다. 3110-00-232-7979 . 치수, 재료, 허용오차, 성능 특성 등을 찾아보세요.
- 베어링 씰 유형
- contact
- 보어 직경
- 3.9997 inches minimum and 4.0000 inches maximum
- 접촉각
- 30.0 degrees nominal
- 내부 장착 지정
- standard
- 하중 방향
- angular
- 윤활 재료 문서 및 분류
- mil-g-23827 mil spec single material response
- 전체 외경
- 4.6247 inches minimum and 4.6250 inches maximum
- 전체 너비
- 0.7200 inches minimum and 0.7500 inches maximum
- 재료 문서 및 분류
- unable to decode
- 재료
- 재료
- unable to decode
- 리테이너 제작 방법
- machined
- 씰 수량
- 2
- 특별 기능
- etch v on bores and od of bearings at high points of radial runout,0.0003 radial runout inner ring,0.0004 radial runout outer ring; kaydon precision cass 4,fscm 32828
- 스타일 지정자
- counterbored outer rings, non-separable, back to back mounting
- 표면 마감
- ground
- 표면 처리 문서 및 분류
- mil-v-173 mil spec single treatment response retainer
- 표면 처리 문서 및 분류
- mil-v-173 mil spec single treatment response seal
- 표면 처리
- varnish retainer
- 표면 처리
- varnish seal
- 테스트 데이터 문서
- "32828-63-44-24-1-2 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."
- 윤활재
- unable to decode
관련 베어링
이 NSN과 관련된 다양한 베어링 모델을 살펴보십시오. 아래 베어링을 클릭하면 자세한 기술 데이터, 성능 등급 및 적용 지침을 볼 수 있습니다.
| 부품 번호 | 이름 |
|---|---|
| 203-036-0002 | Duplex Ball Bearing |
| 50219-201 | Duplex Ball Bearing |
| FI040BH4Z050219 | Duplex Ball Bearing |
| FI040BH5Z050219 | Duplex Ball Bearing |
자주 묻는 질문
베어링에 대한 일반적인 질문에 대한 빠른 답변을 찾아보세요. 3110-00-232-7979. 기술 사양, 설치 팁, 유지 관리 지침, 규정 요구 사항 및 문제 해결 조언을 살펴보세요.
- What is the FSCG of the NSN 3110-00-232-7979?
- The FSCG of the NSN 3110-00-232-7979 is 3110
- Does the NSN 3110-00-232-7979 have a Schedule B code assigned?
- Yes, the Schedule B code is 8482105068
- Does NSN 3110-00-232-7979 require demilitarization?
- Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
- Does NSN 3110-00-232-7979 contain precious materials?
- Item contains platinum family metals.
- Does NSN 3110-00-232-7979 contain hazardous materials?
- Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
- When the NSN 3110-00-232-7979 was assigned to the Federal Catalog?
- It was assigned 55년 전, on Sat, Oct 24, 1970