3110-00-232-7979 Duplex Ball Bearing
NSN 的全面規格和應用詳情： 3110-00-232-7979.
概括
探索軸承的詳細摘要資訊： 3110-00-232-7979. 包括 NSN、分類組和識別碼，以支援採購、合規性和準確的零件追蹤。
- 聯邦供應分類
- 3110 未安裝的減摩軸承
- （NSN）國家庫存編號
- 3110-00-232-7979
- 商品名稱代碼
- 30213
- 聯邦物品識別指南
- A044A0
- 分配日期
- 10/24/1970
兩個單列環形球軸承，尺寸經選定，組成匹配對或匹配組。軸承套圈表面經過特殊研磨，達到規定的偏置量，安裝時可產生預定的預緊力。可能包含一個單列角接觸軸承，軸承套圈表面經過特殊研磨，適合雙列安裝。
3.9997 inches minimum and 4.0000 inches maximum bore diameter, angular load direction, 30.0 degrees nominal contact angle, standard internal fit-up designation, contact bearing seal type
數據表
以下是軸承的綜合技術規格： 3110-00-232-7979 . 尋找尺寸、材料、公差、性能特徵等。
- 軸承密封型
- contact
- 孔徑
- 3.9997 inches minimum and 4.0000 inches maximum
- 接觸角
- 30.0 degrees nominal
- 內部裝修名稱
- standard
- 載荷方向
- angular
- 潤滑材料文獻及分類
- mil-g-23827 mil spec single material response
- 總外徑
- 4.6247 inches minimum and 4.6250 inches maximum
- 總寬度
- 0.7200 inches minimum and 0.7500 inches maximum
- 物料文件及分類
- unable to decode
- 材料
- 材料
- unable to decode
- 保持器的製造方法
- machined
- 封條數量
- 2
- 特殊功能
- etch v on bores and od of bearings at high points of radial runout,0.0003 radial runout inner ring,0.0004 radial runout outer ring; kaydon precision cass 4,fscm 32828
- 樣式指示器
- counterbored outer rings, non-separable, back to back mounting
- 表面處理
- ground
- 表面處理文件及分類
- mil-v-173 mil spec single treatment response retainer
- 表面處理文件及分類
- mil-v-173 mil spec single treatment response seal
- 表面處理
- varnish retainer
- 表面處理
- varnish seal
- 測試資料文檔
- "32828-63-44-24-1-2 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."
- 潤滑材料
- unable to decode
相关轴承
探索与此 NSN 相关的各种轴承模型。点击下面的任何轴承，查看详细的技术数据、性能等级和应用指南。
| 零件編號 | 姓名 |
|---|---|
| 203-036-0002 | Duplex Ball Bearing |
| 50219-201 | Duplex Ball Bearing |
| FI040BH4Z050219 | Duplex Ball Bearing |
| FI040BH5Z050219 | Duplex Ball Bearing |
常見問題
快速找到有關軸承的常見問題的答案： 3110-00-232-7979. 探索技術規格、安裝技巧、維護指南、監管要求和故障排除建議。
- What is the FSCG of the NSN 3110-00-232-7979?
- The FSCG of the NSN 3110-00-232-7979 is 3110
- Does the NSN 3110-00-232-7979 have a Schedule B code assigned?
- Yes, the Schedule B code is 8482105068
- Does NSN 3110-00-232-7979 require demilitarization?
- Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
- Does NSN 3110-00-232-7979 contain precious materials?
- Item contains platinum family metals.
- Does NSN 3110-00-232-7979 contain hazardous materials?
- Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
- When the NSN 3110-00-232-7979 was assigned to the Federal Catalog?
- It was assigned 55 年前, on Sat, Oct 24, 1970