Thrust Ball Bearings - Page 36 of 37

915 parts in our catalog
17701000 NSN 3110-01-597-3062
  • Special Features: Used on a water cannon; 5/16 inch
17702000 NSN 3110-01-597-3505
  • Special Features: Used on a water cannon; 1/4 inch
23735 NSN 3110-01-597-8486
CL-6-BD Ball Detent NSN 3110-01-600-0705
  • End Application: Stryker
232-0-001 REV - ITEM NO.22 NSN 3110-01-602-5312 Cross Reference: 605-1-043
  • End Application: Update
60715K13 One-piece Steel Thrust Ball Bearing NSN 3110-01-603-4912
  • Overall Height: 0.5625 inches
  • Overall Width: 1.4687 inches
  • Bore Diameter: 0.750 inches
  • Overall Outside Diameter: 1.4687 inches
  • Lubrication Material: Oil
097-7557 Thrust Bearing Ball NSN 3110-01-603-9051
  • End Application: Truck, lift fork, model: v40d, 1.5t, elec
93341-34019-00 NSN 3110-01-603-9840
  • End Application: Engine, outbo
P12615035 NSN 3110-01-604-1689
D39-1/2 Axial Deep Groove Ball Bearing (series D) NSN 3110-01-605-0943
  • Bore Diameter: 3.000 millimeters
  • Overall Outside Diameter: 4594.000 inches
  • Smallest Outside Diameter: 3.000 inches
  • Style Designator: Grooved race surface, banded od
7060-MP NSN 3110-01-608-8994
WI Thrust Bearing NSN 3110-01-610-3791 Cross Reference: 13015980, INA WI
  • End Application: 1015-01-598-4568
  • Largest Bore Diameter: 1.0313 inches
  • Surface Finish: Ground
  • Retainer Fabrication Method: Machined
  • Alignment Type: Rigid
20114 NSN 3110-01-613-7920
  • End Application: 2330-01-598-1686
60715K34 One-piece Thrust Ball Bearing NSN 3110-01-614-7451
  • End Application: Update
  • Largest Bore Diameter: Between 1.997 inches and 2.002 inches
  • Retainer Fabrication Method: Machined
  • Thrust Directional Capability Designation: Single
  • Material: Steel
37906-11 Clutch Ball Bearing NSN 3110-01-615-6660
  • End Application: Harley-davidson motorcycle
2099390 NSN 3110-01-618-8401 Cross Reference: 2099390-D
061509 Skf Preload 51136 Bearing NSN 3110-01-619-8770
  • Overall Height: 34.0 millimeters
  • Overall Outside Diameter: 225.0 millimeters
  • End Application: Waterjet, marine
  • Bore Smallest Diameter: 222.0 millimeters
  • Largest Bore Diameter: 180.0 millimeters
5008160 Thrust Bearing Unit NSN 3110-01-632-1504
S0194 Thrust Bearing NSN 3110-01-632-3527
  • Overall Height: 8.000 inches
  • Overall Outside Diameter: 16.000 inches
  • Bore Smallest Diameter: 8.000 inches
  • Material: Stainless steel
  • Style Designator: Flat race surface, in line ball retainer
82236C91 Bearing Assembly NSN 3110-01-633-0076
  • End Application: Transfer gearbox-4 wheel drive
MIL-001-1033 NSN 3110-01-642-1777
F11TB2 Thrust Ball Bearing NSN 3110-01-643-6897
H11TB2 Thrust Ball Bearing NSN 3110-01-644-6252
  • Special Features: Pump size is 24-40 gal, shaft size is 0.8750"
609 Thrust Ball Bearing NSN 3110-01-644-8341 Cross Reference: 24441, PL86-K1 ILLUSTRATION F INDEX 19
  • End Application: Hoist k1ha22l
50459101 Thrust Bearing NSN 3110-01-644-9651
  • End Application: Space radar