BEARING,SLEEVE
FBJW24TF08WM
(NSN) National Stock Number
3120-00-553-2434
Federal Supply Classification
3120 Unmounted Plain Bearings
Item Name Code
13205
Schedule B Code
8482997090
Summary
0.2975 inches minimum and 0.3125 inches maximum overall length, 0.9388 inches minimum and 0.9398 inches maximum body outside diameter, 0.7505 inches minimum and 0.7515 inches maximum body inside diameter, 1.4800 inches minimum and 1.5000 inches maximum flange outside diameter, 0.0575 inches minimum and 0.0625 inches maximum flange width, square inside left corner corner shape
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 5 | - | - | 5 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | ZZ |
Identification
A tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. It must have a visible or detectable means of lubrication or be self-lubricated. The over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. Includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. See also bushing, sleeve; spacer, sleeve; and washer (as modified). Excludes:pin, hollow.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 13205 | A045A0 | - | 1 |
Specifications
Overall Length
0.2975 inches minimum and 0.3125 inches maximum
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Body Outside Diameter
0.9388 inches minimum and 0.9398 inches maximum
Details
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.Body Inside Diameter
0.7505 inches minimum and 0.7515 inches maximum
Details
The length of a straight line which passes through the center of a body,and terminates at the inside circumference.Flange Outside Diameter
1.4800 inches minimum and 1.5000 inches maximum
Details
The length of a straight line which passes through the center of the flange,and terminates at the outside circumference.Flange Width
0.0575 inches minimum and 0.0625 inches maximum
Details
A measurement taken at right angles to the length of a flange,in distinction from thickness.Corner Shape
square inside left corner
Details
The physical configuration of the corner.Corner Shape
square inside right corner
Details
The physical configuration of the corner.Corner Shape
square outside left corner
Details
The physical configuration of the corner.Corner Shape
square left flange outside right corner
Details
The physical configuration of the corner.Corner Shape
square outside right corner
Details
The physical configuration of the corner.Corner Shape
undercut left flange body corner
Details
The physical configuration of the corner.Special Features
plastic,polytetrafluoroethylene liner bonded to left end surface of flange
Details
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.Material
aluminum alloy 2024 outer layer
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material
plastic polytetrafluoroethylene inner layer
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
qq-a-200/3,t8511 fed spec single material response outer layer or qq-a-225/6,t851 fed spec single material response outer layer
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Surface Treatment
anodize outer layer or chromate outer layer
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Surface Treatment Document And Classification
mil-a-8625,type 1 or 2 mil spec single treatment response overall or mil-c-5541 mil spec single treatment response overall
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Style Designator
solid, external flange one end
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| ADLF12A008 | D8277 | 5 | - | 5 | 2 | - | KZ |
| KDJ12A008-17 | 97613 | 5 | - | 5 | 9 | - | SB |
| KDJ12A008-342 | 97613 | 5 | - | 5 | 2 | - | KZ |
| AHJF12A008 | 50294 | 5 | - | 5 | 2 | - | KZ |
| 07-382-12A008 | 09455 | 5 | - | 5 | 2 | - | KZ |
| 91087-12A008 | 09455 | 5 | - | 5 | 9 | - | SB |
| KRJ12NDYB-12A008M | 50632 | 5 | - | 5 | 2 | - | KZ |
| FBRR-12A008 | 73134 | 5 | - | 5 | 2 | - | KZ |
| 119-00-12-008 | 77896 | 5 | - | 5 | 9 | - | SB |
| 123-0212A008 | 77896 | 5 | - | 5 | 9 | - | KZ |
| ST4M127-12A008 | 76301 | 5 | - | 5 | 9 | - | SB |
| ATTF12A008 | 15860 | 5 | - | 5 | 9 | - | SB |
| NHLF12A008 | 15860 | 5 | - | 3 | 2 | - | KZ |
| FBJW24TF-12A008 | 21335 | 5 | - | 5 | 9 | - | KZ |
| FBJW24TF08WM | 21335 | 5 | - | 5 | 9 | - | KZ |
| AS81934/2 | 0U583 | 5 | - | 3 | 1 | - | ZZ |
| AS81934/9 | 0U583 | 5 | - | 3 | 1 | - | ZZ |
| M81934/2-12A008 | 0U583 | 5 | - | 3 | 2 | - | ZZ |
| AS81934/2 | 81343 | E | - | 5 | 9 | - | ZZ |
| AS81934/9 | 81343 | E | - | 5 | 9 | - | ZZ |
| M81394/2-12A008 | 81343 | E | - | 5 | 9 | - | ZZ |
| M81934/2-12A008 | 81343 | E | - | 5 | 9 | - | ZZ |
| M81934/2-12A008 | 81349 | E | - | 5 | 9 | - | KZ |
| MIL-B-81934 | 81349 | E | - | 5 | 9 | - | KZ |
| MS21241-12A008 | 96906 | 6 | - | 5 | 9 | - | KZ |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 58860 | - | P | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 742 | Z | 9 |
Certified Supplier
Order with confidence, we are a valued certified supplier serving customers in the military and aerospace industries.
- ISO9001 / AS9100 Quality Standards
- HAZMAT Certified
- On Time Delivery
- Qualified Sales Team
- Counterfeit Parts Prevention
- 100% Product Inspections
Manufacturer
RBC AIRCRAFT PRODUCTS, INC.
CAGE: 3NPS1
TORRINGTON
, CT
, 06790-2427
UNITED STATES
FAQs
Frequently asked questions for NSN 3120-00-553-2434
When the NSN 3120-00-553-2434 was assigned to the Federal Catalog?
It was assigned 49 years ago, on Wed, Oct 30, 1974
Does the NSN 3120-00-553-2434 contain any precious metals?
Type/content is unknown
What is the NIIN of the NSN 3120-00-553-2434?
The National Item Identification Number (NIIN) of the NSN 3120-00-553-2434 is 00-553-2434
Does the NSN 3120-00-553-2434 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products
BEARING,SLEEVE
3120-00-553-2434
ADLF12A008
BAUKNECHT HAUSGERAETE GMBH
BEARING,SLEEVE
3120-00-553-2434
KDJ12A008-17
SARGENT AEROSPACE & DEFENSE, LLC DBA KAHR BEARING
BEARING,SLEEVE
3120-00-553-2434
KDJ12A008-342
SARGENT AEROSPACE & DEFENSE, LLC DBA KAHR BEARING
BEARING,SLEEVE
3120-00-553-2434
AHJF12A008
NEW HAMPSHIRE BALL BEARINGS INC DIV PRECISION DIVISION
BEARING,SLEEVE
3120-00-553-2434
07-382-12A008
RBC TRANSPORT DYNAMICS CORP DIV RBC TRANSPORT DYNAMICS
BEARING,SLEEVE
3120-00-553-2434
91087-12A008
RBC TRANSPORT DYNAMICS CORP DIV RBC TRANSPORT DYNAMICS
BEARING,SLEEVE
3120-00-553-2434
KRJ12NDYB-12A008M
KAMATICS CORPORATION
BEARING,SLEEVE
3120-00-553-2434
FBRR-12A008
ROLLER BEARING CO OF AMERICA INC
BEARING,SLEEVE
3120-00-553-2434
119-00-12-008
REXNORD INDUSTRIES, LLC DIV AEROSSPACE BEARING OPERATION
BEARING,SLEEVE
3120-00-553-2434
123-0212A008
REXNORD INDUSTRIES, LLC DIV AEROSSPACE BEARING OPERATION
BEARING,SLEEVE
3120-00-553-2434
ST4M127-12A008
THE BOEING COMPANY DIV DEFENSE
BEARING,SLEEVE
3120-00-553-2434
ATTF12A008
NEW HAMPSHIRE BALL BEARINGS INC DIV ASTRO DIVISION
BEARING,SLEEVE
3120-00-553-2434
NHLF12A008
NEW HAMPSHIRE BALL BEARINGS INC DIV ASTRO DIVISION
BEARING,SLEEVE
3120-00-553-2434
FBJW24TF-12A008
TIMKEN CO DIV THE TIMKEN COMPANY
BEARING,SLEEVE
3120-00-553-2434
FBJW24TF08WM
TIMKEN CO DIV THE TIMKEN COMPANY
BEARING,SLEEVE
3120-00-553-2434
AS81934/2
SAE INTERNATIONAL
BEARING,SLEEVE
3120-00-553-2434
AS81934/9
SAE INTERNATIONAL
BEARING,SLEEVE
3120-00-553-2434
M81934/2-12A008
SAE INTERNATIONAL
BEARING,SLEEVE
3120-00-553-2434
AS81934/2
SOCIETY OF AUTOMOTIVE ENGINEERS INC
BEARING,SLEEVE
3120-00-553-2434
AS81934/9
SOCIETY OF AUTOMOTIVE ENGINEERS INC
BEARING,SLEEVE
3120-00-553-2434
M81394/2-12A008
SOCIETY OF AUTOMOTIVE ENGINEERS INC
BEARING,SLEEVE
3120-00-553-2434
M81934/2-12A008
SOCIETY OF AUTOMOTIVE ENGINEERS INC
BEARING,SLEEVE
3120-00-553-2434
M81934/2-12A008
MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
BEARING,SLEEVE
3120-00-553-2434
MIL-B-81934
MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
BEARING,SLEEVE
3120-00-553-2434
MS21241-12A008
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M