3110-01-191-7541 Duplex Ball Bearing
Comprehensive specifications and application details for NSN: 3110-01-191-7541.
Summary
Explore detailed summary information for bearing: 3110-01-191-7541. Includes NSN, classification group, and identification codes to support sourcing, compliance, and accurate part tracking.
- Federal Supply Classification
- 3110 Unmounted Antifriction Bearings
- (NSN) National Stock Number
- 3110-01-191-7541
- Item Name Code
- 30213
- Federal Item Identification Guide
- A044A0
- Assigment Date
- 10/12/1984
Two single row annular ball bearings selected dimensionally to be a matched pair or set. The ring faces have been specially ground to specified offsets that will produce predetermined preload when mounted. May include a single row angular contact bearing with faces specially ground for duplex mounting.
20.0 pounds minimum and 30.0 pounds maximum bearing preload rating, mil-l-6085 mil spec single material response lubrication material document and classification, 15.0 degrees minimum and 25.0 degrees maximum contact angle, angular load direction, 4.4997 inches minimum and 4.5000 inches maximum bore diameter
Datasheet
Below are the comprehensive technical specifications for bearing: 3110-01-191-7541 . Find dimensions, materials, tolerances, performance characteristics, etc.
- Bearing Preload Rating
- 20.0 pounds minimum and 30.0 pounds maximum
- Bore Diameter
- 4.4997 inches minimum and 4.5000 inches maximum
- Contact Angle
- 15.0 degrees minimum and 25.0 degrees maximum
- Load Direction
- angular
- Lubrication Material Document And Classification
- mil-l-6085 mil spec single material response
- Overall Outside Diameter
- 5.1246 inches minimum and 5.1250 inches maximum
- Overall Width
- 0.6050 inches minimum and 0.6250 inches maximum
- Material Document And Classification
- unable to decode
- Material
- Material
- unable to decode
- Retainer Fabrication Method
- pressed
- Shield Quantity
- 2
- Special Features
- vacuum impregnated retainer with specified oil,centrifuge for 2 minutes at 100 g after vacuum; inscribe match mark on od of each bearing; 1 shield each bearing
- Specification/Standard Data
- 82577-801860 manufacturers standard
- Standard Tolerance Designation
- abec no.5
- Style Designator
- counterbored outer rings, non-separable, back to back mounting
- Surface Finish
- ground
- Lubrication Material
- unable to decode
Replaces
The NSN 3110-01-191-7541 is used in place of the following discontinued or alternate items:
| NSN | Name | Date |
|---|---|---|
| 3110-01-126-9153 | No Name Available | 05/01/2007 |
Related Bearings
Explore the various bearing models associated with this NSN. Click on any bearing below to view detailed technical data, performance ratings, and application guidelines.
Frequently Asked Questions
Find quick answers to common questions about bearing: 3110-01-191-7541. Explore technical specifications, installation tips, maintenance guidelines, regulatory requirements, and troubleshooting advice.
- What is the FSCG of the NSN 3110-01-191-7541?
- The FSCG of the NSN 3110-01-191-7541 is 3110
- Does the NSN 3110-01-191-7541 have a Schedule B code assigned?
- Yes, the Schedule B code is 8482105068
- Does NSN 3110-01-191-7541 require demilitarization?
- "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"
- Does NSN 3110-01-191-7541 contain precious materials?
- Item does not contain precious metal.
- Does NSN 3110-01-191-7541 contain hazardous materials?
- Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
- When the NSN 3110-01-191-7541 was assigned to the Federal Catalog?
- It was assigned 41 years ago, on Fri, Oct 12, 1984