3110-01-191-7541 Duplex Ball Bearing
NSN에 대한 포괄적인 사양 및 애플리케이션 세부 정보: 3110-01-191-7541.
요약
베어링에 대한 자세한 요약 정보를 살펴보세요. 3110-01-191-7541. 소싱, 규정 준수 및 정확한 부품 추적을 지원하기 위해 NSN, 분류 그룹 및 식별 코드가 포함되어 있습니다.
- 연방 공급 분류
- 3110 비장착형 마찰 방지 베어링
- (NSN) 국가 재고 번호
- 3110-01-191-7541
- 품목 이름 코드
- 30213
- 연방 품목 식별 가이드
- A044A0
- 배정 날짜
- 10/12/1984
치수적으로 선택된 두 개의 단열 환형 볼 베어링이 한 쌍 또는 세트로 구성됩니다. 링 면은 특정 오프셋으로 특수 연삭되어 장착 시 미리 정해진 예압을 생성합니다. 이중 장착을 위해 특수 연삭된 면을 가진 단열 앵귤러 콘택트 베어링이 포함될 수 있습니다.
mil-l-6085 mil spec single material response lubrication material document and classification, angular load direction, 4.4997 inches minimum and 4.5000 inches maximum bore diameter, 15.0 degrees minimum and 25.0 degrees maximum contact angle, 20.0 pounds minimum and 30.0 pounds maximum bearing preload rating
데이터시트
베어링에 대한 포괄적인 기술 사양은 다음과 같습니다. 3110-01-191-7541 . 치수, 재료, 허용오차, 성능 특성 등을 찾아보세요.
- 베어링 예압 정격
- 20.0 pounds minimum and 30.0 pounds maximum
- 보어 직경
- 4.4997 inches minimum and 4.5000 inches maximum
- 접촉각
- 15.0 degrees minimum and 25.0 degrees maximum
- 하중 방향
- angular
- 윤활 재료 문서 및 분류
- mil-l-6085 mil spec single material response
- 전체 외경
- 5.1246 inches minimum and 5.1250 inches maximum
- 전체 너비
- 0.6050 inches minimum and 0.6250 inches maximum
- 재료 문서 및 분류
- unable to decode
- 재료
- 재료
- unable to decode
- 리테이너 제작 방법
- pressed
- 방패 수량
- 2
- 특별 기능
- vacuum impregnated retainer with specified oil,centrifuge for 2 minutes at 100 g after vacuum; inscribe match mark on od of each bearing; 1 shield each bearing
- 사양/표준 데이터
- 82577-801860 manufacturers standard
- 표준 허용 오차 지정
- abec no.5
- 스타일 지정자
- counterbored outer rings, non-separable, back to back mounting
- 표면 마감
- ground
- 윤활재
- unable to decode
대체합니다
The NSN 3110-01-191-7541 is used in place of the following discontinued or alternate items:
| NSN | 이름 | 날짜 |
|---|---|---|
| 3110-01-126-9153 | No Name Available | 05/01/2007 |
관련 베어링
이 NSN과 관련된 다양한 베어링 모델을 살펴보십시오. 아래 베어링을 클릭하면 자세한 기술 데이터, 성능 등급 및 적용 지침을 볼 수 있습니다.
자주 묻는 질문
베어링에 대한 일반적인 질문에 대한 빠른 답변을 찾아보세요. 3110-01-191-7541. 기술 사양, 설치 팁, 유지 관리 지침, 규정 요구 사항 및 문제 해결 조언을 살펴보세요.
- What is the FSCG of the NSN 3110-01-191-7541?
- The FSCG of the NSN 3110-01-191-7541 is 3110
- Does the NSN 3110-01-191-7541 have a Schedule B code assigned?
- Yes, the Schedule B code is 8482105068
- Does NSN 3110-01-191-7541 require demilitarization?
- "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"
- Does NSN 3110-01-191-7541 contain precious materials?
- Item does not contain precious metal.
- Does NSN 3110-01-191-7541 contain hazardous materials?
- Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
- When the NSN 3110-01-191-7541 was assigned to the Federal Catalog?
- It was assigned 41년 전, on Fri, Oct 12, 1984