3110-01-191-7541 Duplex Ball Bearing
NSN 的全面規格和應用詳情： 3110-01-191-7541.
概括
探索軸承的詳細摘要資訊： 3110-01-191-7541. 包括 NSN、分類組和識別碼，以支援採購、合規性和準確的零件追蹤。
- 聯邦供應分類
- 3110 未安裝的減摩軸承
- （NSN）國家庫存編號
- 3110-01-191-7541
- 商品名稱代碼
- 30213
- 聯邦物品識別指南
- A044A0
- 分配日期
- 10/12/1984
兩個單列環形球軸承，尺寸經選定，組成匹配對或匹配組。軸承套圈表面經過特殊研磨，達到規定的偏置量，安裝時可產生預定的預緊力。可能包含一個單列角接觸軸承，軸承套圈表面經過特殊研磨，適合雙列安裝。
15.0 degrees minimum and 25.0 degrees maximum contact angle, 20.0 pounds minimum and 30.0 pounds maximum bearing preload rating, mil-l-6085 mil spec single material response lubrication material document and classification, angular load direction, 4.4997 inches minimum and 4.5000 inches maximum bore diameter
數據表
以下是軸承的綜合技術規格： 3110-01-191-7541 . 尋找尺寸、材料、公差、性能特徵等。
- 軸承預緊額定值
- 20.0 pounds minimum and 30.0 pounds maximum
- 孔徑
- 4.4997 inches minimum and 4.5000 inches maximum
- 接觸角
- 15.0 degrees minimum and 25.0 degrees maximum
- 載荷方向
- angular
- 潤滑材料文獻及分類
- mil-l-6085 mil spec single material response
- 總外徑
- 5.1246 inches minimum and 5.1250 inches maximum
- 總寬度
- 0.6050 inches minimum and 0.6250 inches maximum
- 物料文件及分類
- unable to decode
- 材料
- 材料
- unable to decode
- 保持器的製造方法
- pressed
- 盾牌數量
- 2
- 特殊功能
- vacuum impregnated retainer with specified oil,centrifuge for 2 minutes at 100 g after vacuum; inscribe match mark on od of each bearing; 1 shield each bearing
- 規格/標準數據
- 82577-801860 manufacturers standard
- 標準公差名稱
- abec no.5
- 樣式指示器
- counterbored outer rings, non-separable, back to back mounting
- 表面處理
- ground
- 潤滑材料
- unable to decode
替換
The NSN 3110-01-191-7541 is used in place of the following discontinued or alternate items:
| NSN | 姓名 | 日期 |
|---|---|---|
| 3110-01-126-9153 | No Name Available | 05/01/2007 |
相关轴承
探索与此 NSN 相关的各种轴承模型。点击下面的任何轴承，查看详细的技术数据、性能等级和应用指南。
常見問題
快速找到有關軸承的常見問題的答案： 3110-01-191-7541. 探索技術規格、安裝技巧、維護指南、監管要求和故障排除建議。
- What is the FSCG of the NSN 3110-01-191-7541?
- The FSCG of the NSN 3110-01-191-7541 is 3110
- Does the NSN 3110-01-191-7541 have a Schedule B code assigned?
- Yes, the Schedule B code is 8482105068
- Does NSN 3110-01-191-7541 require demilitarization?
- "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"
- Does NSN 3110-01-191-7541 contain precious materials?
- Item does not contain precious metal.
- Does NSN 3110-01-191-7541 contain hazardous materials?
- Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
- When the NSN 3110-01-191-7541 was assigned to the Federal Catalog?
- It was assigned 41 年前, on Fri, Oct 12, 1984